|
|
|
|
| |
Temporary Protective Masking Compounds for
Yacht,Boat and Ship Building Applications in The Marine Industry
Our ShiProtect peelable coatings are engineered for use on boat molds, gel coats, fiberglass, glass, steel and many other surfaces. It will protect vessels that remain outdoors for the duration of the job or transportation process. Just strip away when the job is complete and the surface will be protected.
Ship Building is composing of various construction phases. The major process is as below:
Shop blasting and primary coating, steel cutting, block assembling, outfitting, sweep blasting and painting, blocks erection and welding, painting and launching, outfitting & testing and delivery.
All these processes can require a construction period of more than 1 year. As a result rework is often required on painted surfaces due to long storage periods and/or mechanical and welding damage, as well as heavy weather conditions.
Problem: The re-work claims additional cost, time extension and environmental problems to shipyard.
Solution: Therefore, many shipyards are using our Temporary protective coating for protection during this phase. |
|
|
|
|
|
|
| |
I. Major Application: Platform Deck, Ship On-Deck, Containership Cargo Area Objective
A. To prevent rust caused by welding and hot work at the block joint area.
B. To protect the first paint coating from heavy weather and any mechanical damage before applying the second coating
C. To protect the first paint coating from contamination caused by grinding dust, cutting spatters and oil spillage.
Application Detail:
- Steel Structure
- On the shop primary or the first coating |
|
|
|
|
| |
II. Pipe (LNGC Cargo Piping and Other Stainless Steel Pipe)
Objective :
A. To prevent rust caused by long storage and mechanical/handling damage
B. To diminish passivation work caused by contamination grinding dust, cutting spatters and oil spillage.
Application Detail:
- Stainless steel pipe (SUS 304/316 and 304L/316L)
- On the bare stainless steel pipe
|
|
|
|
|
|
|
|
III. Equipments (Radar Master, Pump Tower, Fore Master etc)
Objective :
A. To protect the final paint coating from heavy weather and any mechanical damage.
B. To protect the final paint coating from contamination caused by grinding dust, cutting spatters and oil spillage.
Application Detail:
- Steel Structure
- On the final paint coating |
|
|
|
|
| |
 |
|
|
|
|
|
Deck Protection: |
|
|
Prevents damage and rust staining of non skid painted deck surfaces during construction and refit.
The Deck Protection: system operates as a skin tight coating designed to protect the profiled non skid painted deck surfaces against mechanical damage and rust staining caused by the ingress of dirt and metal raisings during the long period of construction.
Supplied as a water borne dispersion the peelable coatings will not damage or leave residue on painted surfaces and are applied by air assisted or airless spray equipment or lambs wool roller. They can remain in place for many months and simply strip away prior to the handover of the vessel saving many hours of costly rework.
Coatings are non flammable, low hazard and skid resistant. They can be used over a multitude of areas requiring temporary protection. |
|
|
|
|
|
|
|
|
|
|
|
 |
Description: |
|
|
|
|
|
|
 |
Strippable Coatings |
|
 |
Special Features |
|
|
Water Based ,Water Resistant ,Heat Resistant, Strippable Coatings and Peelable coatings For Ship and Boat Construction marine Industry Applications:
Used for protecting deck.
ShiProtect_1100: For cold climate :
Application Temperature range : 35F
to 60F
ShiProtect_1100 E:
For warmer climate : Application
Temperature range : 60F to
120F Color: Blue, can be tinted other color Application : Brush, Airless Spray Only Substrates: M; TS; G |
|
BoatProtect_1680 is engineered to protect
various surfaces on yacht, boat during construction, storage
and transportation against minor abrasion and staining.
Used for
hull protection. Color:
Aqua Blue
Flashpoint: None |
|
BilgeClean 9770 BILGE CLEANER cleans and deodorizers; but doesn't permit pumping the contents overboard if it contains fuel or oil. It has a pleasant lemon odor.
Bilgeclean 9770 contains hydrogen peroxide to assist in both cleaning and deodorize. All of the ingredients are environmentally friendly and are completely biodegradable. |
|
Dried Film is Non Flammable.
Specially designed for Army &
Navy .Water Based ,Water Resistant ,Heat Resistant, Strippable Coatings and Peelable coatings For Ship and Boat Construction marine Industry Applications
Color: Blue, can be tinted other color
Application : Brush, Airless Spray Only
Substrates: M; TS; G |
|
peelable coating to protect valuable teak decking against staining and abrasion. Apply by rolling on and strip away once the construction or refurbishing work is done. |
|
|
|
|
|
|
 |
Main Advantages: |
|
|
|
Offers cost-effective protection during storage, transport and fitting. A tough weather-resistant film, withstands foot traffic, scratching and solvents overspray. It removes cleanly without leaving residue.
Peelable Masking Compounds: |
|
|
|
Results in a reduction of labor costs. |
|
Once cured, it provides an extremely tough, uniform film thickness. |
|
Curing time can be cut considerably with the use heat lamps (100F), circulation of air and other factors. |
|
Easily removed...peels off in sheets which eliminates messy hand scrapping |
|
Safe...non flammable |
|
Suitable for all non porous substrates including polycarbonates, plastic and painted surfaces |
|
The results of Shipprotect 1100 films in salt water immersion are: 24 hours exposure - 10
(no effect) 96 hours exposure – 9 (very slight water absorption) 96 hours + 2 hours to dry - 10 |
|
|
|
|
|
|
|
|
|
 |
Application: |
|
|
|
|
|
|
|
|
|
Peelable Masking Compounds: |
|
|
|
|
|
Results in a reduction of labor costs by reducing the application time. |
|
Once cured, provides an extremely tough, uniform film thickness. |
|
Curing time can be cut in half with the use of increasing the temperature to 100F and or process assistance such as heat lamps, circulation of air and other factors. |
|
Easily removed...peels off in sheets which eliminates messy hand scrapping |
|
Safe...non flammable |
|
Suitable for all substrates including polycarbonates, plastic and painted surfaces |
|
|
|
|
|
|
General Chemical has a complete line of Peelable Masks to meet your your challenging requirement. If we do not have something to meet your specific requirement, than we will develop it by working with you to meet that need for strippable coating.

|
|
|
|
|
|
|
|
| |
|
|
|
| |
|
|
|
 |
|
General Chemical Corp.
12336 Emerson Dr. Brighton, Michigan(MI.) 48116, USA |
| USA: |
866-623-5600 |
| Overseas: |
248-587-5600 |
| Fax : |
248-587-5606 |
|
 |
|
 |
|
 |
|
|
|