Section 2 - Composition / Information on Ingredients
Section 9 - Physical & Chemical Properties
Physical State:
Liquid
Gel
Odor:
Mild, sweet Vapor
Vapor Density:
Not determined
Specific Gravity:
1.0 - 1.1
Viscosity:
2300 - 2600 Brookfield
Solubility Water:
Complete
Percent Volatile:
Not determined
Appearance:
Water
White
Pressure:
Not determined
Boiling Point:
>210 ºF
pH:
4.0
VOC:
5.6 lbs./gallon
Evaporation Rate:
Not determined
Percent Solids:
1-10
Introduction:
Coating Remover
4870 is a water-based, liquid gel product specially developed for the removal of temporary protective
coatings (TPC) from glass and plastic
surfaces.The thixotropic nature of the product provides excellent
clinging on vertical surfaces to provide sufficient contact time for temporary
protective coating removal. A unique combination of surfactants provides quick
penetration and easy water rinsing.
2. Material Specifications:
Appearance: Transparent
, water white
Physical state: viscous liquid
gel
Odor Mildly sweet
Density 8.6 lb/gal
pH: 4.0 typical
Solubility in water Complete
Boiling Point > 210°F
3. Application Process
Methods and Equipments Requirements:
TPC Coating Remover 4870 can also be
applied with brush or roller.
Apply 2 to 10 mil thick wet coating of
TPC Coating Remover 4870 on TPC to be
removed from and allow to react for
time depending upon the coating thickness and aging time of the applied TPC.
Rinsing Method:
Then rinse with a room temperature or warm water using a hose or pressurized
water spray.
If TPC is not completely removed, then repeat the same process sequence as
mentioned above.
5. Storage Requirements:
TPC Coating Remover
4870 is a water-based product and therefore should be
protected from freezing. If frozen, thaw and mix thoroughly prior to use. This
product should be used within one year of the manufacturing date.
6. Spillage and Disposal Information:
If TPC Coating Remover
4870 is spilled, soak it with an absorbent material.
Transfer into waste disposal container and dispose as solid waste. Refer to
MSDS for waste disposal information.
7. Precautionary Information:
Please refer to MSDS prior to usage of this product.
General Chemical Corp.
12336 Emerson Dr.
Brighton, Michigan(MI.)
48116, USA
