| |
PEELKLEER 2960 |
|
| |
Strippable Protectivecoating |
|
|
|
|
|
|
|
|
|
|
| |
 |
Introduction: |
|
|
|
|
|
| |
General Chemical Corp.’s PEELKLEER 2960 is a strippable coating engineered for use on a wide variety of surfaces. Typical applications include paint spray booth surfaces, and applications where a temporary protective coating is desired. Depending on the thickness of the wet film; dry film thickness can range from one to ten mils. Thin films are clear while thicker films are translucent. The application of PEELKLEER 2960 coatings will protect surfaces from paint overspray or damage during manufacturing and shipping. PEELKLEER 2960 represents the ultimate in non-solvent, water borne, strippable coatings. PEELKLEER 2960 does not contain VOCs. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Application: |
|
|
|
|
|
| |
PEELKLEER 2960 is normally used as received, it can be applied by air or airless spray, roll coating, or brushing. PEELKLEER 2960 may also be diluted at the rate of one to four ounces of water per quart. The sprayed coating dries, depending on the film thickness, in 30 minutes to 4 hours. PEELKLEER 2960 is applied to yielding a dry film from one to ten mils (.001" to .010") thick. The coating is resistant to attack by solvents used in paint. Application temperatures range from 120º F. to no lower than 60º F. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Removal: |
|
|
|
|
|
| |
PEELKLEER 2960 can be removed by water jet or by peeling. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Flammability: |
|
|
|
|
|
| |
Water rinsable PEELKLEER 2960 presents no fire hazard as received, during, or after application. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Disposal: |
|
|
|
|
|
| |
During removal, water hose-down type coatings will often be mixed into the paint spray booth waste system. PEELKLEER 2960 coatings are generally compatible with this system. PEELKLEER 2960 is formulated to exclude ingredients that are deleterious to the painting process, such as silicones, or to the water wash system, such as foam generating or foam stabilizing ingredients. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Operating Guidelines: |
|
|
|
|
|
| |
1.When applying, use the same protection as used while applying paint. The booth Ventilation systems should be operating while the material is being sprayed.
|
|
|
|
|
| |
2.Chemical goggles, impervious gloves should be worn when handling Peelkleer 2960. |
|
|
|
|
| |
3.Use of non-sparking metal equipment is advised when scraping to remove booth coatings, to avoid fire hazards from the ccumulated paint. |
|
|
|
|
|
|
|
|
|
|
| |
 |
First Time Application: |
|
|
|
|
|
| |
I. Cleaning of Equipment: |
|
| |
To clean pressure pot, airless equipment, spray guns, spray lines,
|
|
|
|
|
| |
1. Flush equipment and lines with a paint thinner type material (ex. toluene, xylene or mek). |
|
|
|
|
| |
2.Follow with a water reducible solvent, such as butyl cellosolve. This will help to remove any solvent residue. |
|
|
|
|
| |
3.Thoroughly rinse with water. Making sure that all solvent and paint residues are removed. |
|
|
|
|
| |
II. Cleaning of Spray Booth Walls:
|
|
|
|
|
| |
1.Clean surface with butyl-cellosolve type cleaner.
|
|
|
|
|
| |
2.Remove all previous peelable coatings, oils, dirt, and solvent residue from the surface.
NOTE: You do not have to do this cleaning step to have PEELKLEER 2960 peel or rinse off the surfaces. This procedure can be eliminated after the second and all subsequent applications. |
|
|
|
|
| |
3. PEELKLEER 2960 can now be applied. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Some Equipment Notes: |
|
|
|
|
|
| |
Airless System: Recommended tip size is .070, similar to a glue tip
|
|
|
|
|
| |
Peelkleer 2960 can also be applied by roller coating or by brushing.
|
|
|
|
|
| |
Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification. |
|
|
|
|
|
|
|
|
|
|
