| |
Peelkleer 4210 |
|
| |
When Cured: Water resistant,
alkali resistant and heat
resistant |
|
|
|
|
|
|
|
|
|
|
| |
 |
Introduction: |
|
|
|
|
|
| |
General Chemical's Peelkleer 4210 is a
clear, water resistant, peelable
coating or strippable coating which has many applications, including
paint booth windows and light fixtures, where
paint over spray accumulation must be readily removed and clear
coating allows it to see through. |
|
|
|
|
| |
Clear
coating may also be used to protect
various types of surfaces during
industrial processing. Peelkleer 4210 air-dries quickly, leaving a tough, yet
flexible strippable coating that is easily removed from a variety of surfaces. |
|
|
|
|
| |
Peelkleer 4210 represents the ultimate solvent-based strippable
coating technology. It is stabilized against brittleness and is not softened or penetrated by most water-based compounds. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Application: |
|
|
|
|
|
| |
Peelkleer 4210 should be used as received. It is applied by airless spray, roll
coating, or brushing. The sprayed
coating dries to touch in 10 minutes or less, depending on temperature and film thickness. Peelkleer 4210 should be applied to form a dry film in the range of 1 to 3 mil (.001" to .003") thick. Application temperature is ambient to no lower than 50 F, as drying times will be affected. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Removal: |
|
|
|
|
|
| |
Peelkleer 4210 is readily removed from surfaces by peeling. |
|
|
|
|
|
|
|
|
|
|
| |
Compatibility: |
|
|
|
|
| |
Peelkleer 4210 is uniquely formulated without ingredients that are deleterious to
painting processes, such as silicones, or to the water wash system, such as foam generating compounds or stabilizing ingredients. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Operating Guidelines: |
|
|
|
|
|
| |
1.When applying, use the same protection as used while applying
paint. Ventilation systems should be operating while the material is being sprayed.
|
|
|
|
|
| |
2.Chemical goggles, impervious gloves and respirators should be worn when handling Peelkleer 4210. |
|
|
|
|
| |
3.The use of non-sparking equipment is advised when applying or removing Peelkleer 4210. |
|
|
|
|
|
|
|
|
|
|
| |
 |
First Time Application: |
|
|
|
|
|
| |
I. Pre-cleaning of Equipment: |
|
| |
To clean pressure pot, airless equipment, spray guns, spray lines, do the following:
|
|
|
|
|
| |
1. Flush equipment and lines with a
paint thinner type material (ex. toluene, xylene or mek). |
|
|
|
|
| |
2.Spray equipment is now ready for use with Peelkleer 4210.. |
|
|
|
|
| |
3.To clean equipment, thoroughly flush with the above type solvents. |
|
|
|
|
| |
II. Pre-cleaning of Spray Booth Walls:
|
|
|
|
|
| |
1.Surfaces should be cleaned with a
suitable cleaner to remove all
previous peelable coatings, oils, dirt and solvent residues.
|
|
|
|
|
| |
2.You are now ready to use Peelkleer 4210. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Some Equipment Notes: |
|
|
|
|
|
| |
Airless System: Recommended tip size is .070, similar to a glue tip
|
|
|
|
|
| |
Peelkleer 4210 can also be applied by roller
coating or by brushing.
|
|
|
|
|
| |
Peelkleer 4210 can also be applied by rolling
coating or by brushing. |
|
|
|
|
| |
Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification. |
|
|
|
|
|
|
|
