|
HalloweenStore_DecoFilm_2990 |
|
|
Decorate your Window glass with
Halloween Fun using decorative
liquid window film. Enjoy the look
and feel of expensive Halloween
decoration at a fraction of the
cost.
Easy-to-apply water
based liquid peelable window film
creates a beautiful decorative
effect while increasing your store
traffic.
Transform your windows from ordinary
to extraordinary. This decorative
liquid window film add store appeal
and is available in a variety of
colors to fit your needs. |
|
|
Temporary Protective Water Resistant Peelable Coating, Protects
and decorates: Metals, Glass, Acrylics,Enamels And Other Surfaces. Water reducible. VOC Free. Water Resistant Peelable coating for various applications to temporarily protect
and decorate surface from exterior and interior environment , prevent damage and scratches including glass, good sag resistance spray through Air Assisted conventional spray equipment . Low temperature curing and low viscosity |
|
|
|
|
|
 |
|
|
|
|
|
|
|
| |
 |
Main Advantages: |
|
|
|
|
|
| |
|
Safe to use |
|
Water
Based |
|
Water resistant when dry |
|
Water cleanable when wet |
|
Peels from variety of surfaces |
|
|
|
|
|
|
|
|
| |
 |
Application:
Halloween Store Decorative
window liquid film, Halloween
store decorative Floor Coating,
Halloween Store Decorations |
|
|
|
|
|
| |
HalloweenStore_DecoFilm 2990 is normally used as received. It can be applied by spray, roll or brush .
HalloweenStore_DecoFilm 2990 may also be diluted at the rate of one to four ounces of water per gallon or as needed for proper application. The sprayed coating dries, depending on the film thickness, in 30 minutes to 4 hours.
HalloweenStore_DecoFilm 2990 should be applied to yield a dry film from one to ten mils (.001" to .010") thick. The coating, when totally dry, is resistant to water and some solvents used in paint. Application temperatures range from 120º F. for fast force cure to no lower than 45º F.
HalloweenStore_DecoFilm 2990 cures upon water evaporation. Faster cure can be realized by placement of air fans to remove the water from the coating.
The coating when applied is milky but when cured is totally transparent. The milky appearance is indicative of water presence in the coating. Brushes, rollers and spray equipment can be cleaned with water immediately after coating application. The coating becomes water resistant when clear . |
|
|
|
|
|
|
|
|
|
|
| |
 |
Removal: |
|
|
| |
HalloweenStore_DecoFilm 2990 is removed by peeling. Simply, pry a piece of coating in one corner and lift.
|
|
|
|
|
|
|
|
| |
 |
Flammability: |
|
|
| |
Water Resistant
HalloweenStore_DecoFilm 2990 presents no fire hazard as received, during, or after application.
|
|
|
|
|
|
|
|
| |
 |
Disposal: |
|
|
|
|
|
| |
HalloweenStore_DecoFilm 2990 is formulated to exclude ingredients that are deleterious to the painting process, such as silicones, or to the water wash system, such as foam generating or foam stabilizing ingredients. |
|
|
|
|
|
|
|
| |
 |
Operating Guidelines: |
|
|
| |
|
When applying, use the same
protection as used while
applying paint. |
|
|
|
|
|
| |
 |
First Time Application: |
|
|
| |
I. Cleaning of Equipment: |
|
| |
To clean the pressure pot, airless equipment, spray guns, or spray lines: |
|
|
|
|
| |
|
Thoroughly rinse with water. Making sure that all solvent and paint residues are removed. |
|
|
|
|
|
| |
To clean all surfaces where
HalloweenStore_DecoFilm 2990 is to be applied: |
|
|
|
|
|
|
|
| |
 |
Some Equipment Notes: |
|
|
| |
Air assisted spray equipment is recommended for proper film uniformity.
|
|
|
|
|
| |
Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification.
|
|
|
|
|
|
|
|
|
|
|
