|
|
|
| |
This water based coating is meant
for Nuclear Power Plant Industry:
One coating does it all! |
|
|
|
|
| |
When Cured:
Water resistant,
alkali resistant and
heat resistant. |
|
|
|
|
| |
General Chemical's DeconPeel 2640 is
a white water resistant, peelable coating which has application where a
water resistant coating is required to protect metals from corrosion, paint
overspray and other particles. It may also be used to protect various types
of surfaces during industrial processing. DeconPeel 2640 air-dries quickly,
leaving a tough, yet flexible coating that is easily removed from most metal
surfaces. |
|
|
|
|
| |
DeconPeel_2640 represents the
ultimate in non-solvent water based strippable coatings. It is well
stabilized against brittleness and it will not be softened or
penetrated by solvent-based paints International Customer Inquiry :
Supply of BETA- Heavy Duty Decontamination Chemical to be used for Floor
and Equipments (Nuclear) Decontamination Qty: 500 Ltrs.
Specification for BETA- Heavy Duty Decontamination Chemical
It will biodegradable YES
It will have neutral PH YES
Water based Chemical with Sp Gravity 0.95 to 1.05 YES
it will not contain Benzene, chlorinated hydrocarbon. NON PRESENT
It will be non- flammable. NON FLAMMABLE AS RECEIVED (Cured coating can burn
in a fire)
It will be stable & non harmful at ambient temperature. YES |
|
|
|
|
|
|
|
|
|
|
| |
Features: |
|
|
|
|
| |
|
Results in a reduction
of labor costs by reducing the application time. |
|
Once cured, it provides an extremely tough,
uniform film thickness. |
|
Curing time can be cut in half with the use
of increasing temperatures up to 100?F. |
|
Easily removed...peels off in
sheets which eliminates messy hand scrapping |
|
Safe...non flammable |
|
|
|
|
|
|
|
|
|
|
|
| |
How To Apply:
Heavy Duty Decontamination pH Neutral Chemical to be used for Floor ,
Nuclear Equipments Decontamination |
|
|
|
|
| |
DeconPeel 2640 should
be used as received. It can be applied by airless spray, roller or brush.
The sprayed coating dries to touch in 60 minutes or less, depending on
temperature and film thickness. DeconPeel 2640 should be applied to form a
dry film in the range of 5 to 10 mils (.005" to .01") thick. Application
temperature is important for drying times. Warm, dry air flowing over the
coating will remove water quickly. . |
|
|
|
|
| |
| 1. |
Apply 10-12 mils wet water
based peelable film to clean, dry peelable (booth walls, fixtures)
in a smooth, continuous spray. If using airless equipment, use .015
or .017 nozzle at a set pressure of 1200-1500 PSI. With conventional
air spray, we recommend Binks nozzle #68PB with needle #368 at a
pressure of 35-55 PSI. |
| 2. |
After significant paint overspray buildup,
film may be quickly and easily removed. Cut film to start peeling
from one corner. Production time between cleaning is increased;
quality control is improved with better illumination. |
| 3. |
Simply peel off in large, continuous
sheets. Booth is left clean and ready for next application. Messy
hand scraping or solvent removal eliminated. Clean-up is fast. Waste
disposal costs cut. |
| 4. |
The coating provides a tough, flexible
solvent-resistant film which protects booth walls, paint fixtures,
metal parts in storage, or any non-porous metal surface from paint
overspray. |
|
|
|
|
|
| |
DeconPeel_2640 is
normally used as received. The airless spray gun equipment applies it, by
roller coating or by brushing. Sprayed strippable coating is air-dried from
30 minutes to 3 hours, depending on thickness of coating. DeconPeel_2640 is
usually applied to form a film, thickness in the range of 1 to 3 mils (.001"
to .003"). Strippable Coating is usually resistant to attack by paint
solvents. Spraying temperature shall be 60? F minimum. For best results,
apply at room temperature. |
|
|
|
|
|
|
|
|
|
|
|
 |
Removal: |
|
|
|
|
|
| |
DeconPeel_2640 is
developed to be removed by peeling it off. |
|
|
|
|
|
|
|
|
|
|
|
 |
Flammability: |
|
|
|
|
|
| |
Water rinsable
DeconPeel_2640 presents no fire hazard either as received or during or after
application. |
|
|
|
|
|
|
|
|
|
|
|
 |
Disposal: |
|
|
|
|
|
| |
During removal, water
hose-down type coatings will oftentimes be mixed into the paint spray booth
water compound system. DeconPeel_2640 coating is normally compatible with
this kind of system. |
|
|
|
|
| |
DeconPeel_2640 is
uniquely formulated excluding ingredients that are deleterious to the
painting process (such as silicones) or the water washes system (such as
foam generation or stabilizing ingredients). |
|
|
|
|
|
|
|
|
|
|
| |
 |
Operating Guidelines: |
|
|
|
|
|
| |
1.When applying
DeconPeel_2640, use the same protection as used while applying paint. The
booth ventilation system should be operating while the material is being
sprayed.
|
|
|
|
|
| |
2.Chemical goggles and
impervious gloves should be worn when handling or mixing. |
|
|
|
|
| |
3.Use of non-sparking
metal is advised to scrape or spud to remove DeconPeel_2640 to avoid
fire hazard from accumulated paint. |
|
|
|
|
|
|
|
|
|
|
| |
 |
First Time Application: |
|
|
|
|
|
| |
If the Our peelable
coating film rips or tears, the flap may be lifted and resealed by applying
a fresh wet coat to the underside and resealing. Alternatively, cut away
flap and re-apply fresh coating, it will bond to itself.
|
|
|
|
|
|
|
|
|
|
|
| |
 |
Some Equipment Notes: |
|
|
|
|
|
| |
Airless System:
Recommended tip size is .070. Similar to a glue tip will suffice.
|
|
|
|
|
| |
Pressure Pot:
DeconPeel_2640 works well under the following conditions. Pot pressure at
10-15 psi while atomization pressure is 40 psi. If a cloud effect occurs the
pressure is too high. try to control this at the spray gun. If that fails
turn down the pressure a the pressure pot.
|
|
|
|
|
| |
DeconPeel_2640 can also
be applied by rolling coating or by brushing. |
|
|
|
|
| |
 |
|
|
|
|
| |
Note:
The information presented herein is our interpretation of certain test
results and field experience to date. The information is not to be taken as
warranty or representation for which we assume legal responsibility, nor as
permission or recommendation to practice any patented invention without a
license. It is offered solely for your consideration, investigation and
verification. |
|
|
|
|
|
|
|
|
| Top :
Heavy Duty Decontamination pH Neutral Chemical to be used for Floor
, Nuclear Equipments Decontamination |
|
|
|
