|
|
|
| |
Typical
customer inquiry :We are a yacht refit and repair company operating in Malta,
we carry out services such as painting (external and internal), carpentry, teak deck, stainless steel works and many others. Our clients are mainly super yachts. We are a small company however, we intend to grow and actively considering opening a shop in the near future, just off the main yacht marina, thus we actively looking for relative suppliers. |
|
|
|
|
| |
Could you be as kind to forward us some brochures and catalogues regarding your strippable coatings for marine, together with indicative price lists and minimum order quantities. Maybe you can send us a hard copy catalogue together with prices? |
|
|
|
|
| |
Perhaps we can also discuss the possibility of us representing you here in Malta because I as far I could see from your website there is no dealer here in Malta |
|
|
|
|
| |
| DecKProtect peelable coating is
non flammable and
non combustible as supplied and when the dry strippable film is formed and is also low hazard (see separate Health & Safety Data). |
|
|
DecKProtect_4980
For Temporary Protection of Boat, Yacht
|
|
|
|
|
|
|
| |
Designed especially for floors, I has built in traction to walk on it and avoid slippage. 4980 films are
tough and durable to handle heavy forklift and foot traffic. Perfect for floor areas around presses, spray areas, high traffic routes. |
|
|
|
|
| |
It is easy to apply and very easy to peel. Maintenance costs with 4980 are reduced and floors are maintained in brand new condition. . DecKProtect has no VOC's |
|
|
|
|
| |
Easily strippable 4980 allows easy maintenance for any Industrial Floors. |
|
|
|
|
| |
DecKProtect can be used on concrete, tile, glass, ceramic, laminates, brick, and many other non-porous clean surfaces such as : |
|
|
|
|
| |
|
Concrete floors-painted or sealed |
|
Tile Floors-with sealed grout |
|
Wood floors-seal bare wood floors first to prevent pulling up wood fibers |
|
Laminate flooring |
|
Brick Floors-Apply sealant first |
|
Steel, aluminum, brass, copper and other ferrous and non ferrous metals |
|
Glass, plastic and acrylics like Lexan |
|
Other non-porous or well sealed floor materials. |
|
|
|
|
|
| |
General Chemical's DecKProtect_4980 is a clear, water resistant, peelable temporary protective coating which has many applications. It can be used to protect various types of surfaces during industrial processing. DecKProtect_4980 air dries quickly, leaving a tough, clear flexible coating that is easily removed from a variety of surfaces. DecKProtect represents the ultimate in waterborne removable coating technology. It is stabilized against brittleness and is not softened or penetrated by most water-based compounds. |
|
|
|
|
| |
DecKProtect is good over cement, linoleum and floor painted with enamels that are resistant to water. DecKProtect will adhere to enamels based on emulsions and therefore should not be used. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Benefits To You: |
|
|
|
|
|
| |
Temporary Protective Floor Strippable Coatings and Floor Peelable Coatings For Floors |
|
|
|
|
| |
|
Water Based for environment and worker safety |
|
Durable Peelable coating with Built in Traction for avoiding slippage |
|
Keeps everything underneath clean |
|
|
|
|
|
|
|
|
|
|
|
| |
 |
Application: |
|
|
|
|
|
| |
DecKProtect should be used as received. It can be
applied by airless spray, paint roller, or brush. The coating
dries upon water evaporation. Wet coating is
milky (white). Dry coating is
clear. DecKProtect should be applied to form a dry film in the range of 3 to 10 mils(.003" to .010") thick. Application temperature is ambient to no lower than 50ºF. Drying times will be
affected by humidity, film thickness, air movement and temperature. Best time to apply is on week-ends or late afternoons to give a coating time to dry. Proper fan placement can speed the dry by removing water at a much faster rate. Application by roller might require a few coats. Thick coating peels in one large continuous sheet. Thin coatings will break in areas of coating weakness. DecKProtect is water based for safe use and easy water clean up. Dry coatings are water resistant. When applying DecKProtect use the same protection as used while applying paint.. |
|
|
|
|
| |
Note : It is critical to achieve correct dry film thickness for removal and peeling. |
|
|
|
|
| |
Application may be Lambs wool Ships Roller or by spray (conventional air or airless spray equipment with 21 thou tip size). |
|
|
|
|
| |
Take measures to protect and
mask areas against overspray. Be careful and avoid spraying into small openings
where the coating may become thin and subsequently difficult to remove. |
|
|
|
|
| |
Must try to
achieve a defined edge at the end of the area to be coated by taping the outer edges or by other methods. |
|
|
|
|
| |
Do not apply during rain or frost. A MINIMUM of two coats of basecoat will be required allowing the first coat to dry before applying the second. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Precautions: |
|
|
|
|
|
| |
The surface to be applied with DecKProtect should be dry, clean and free from oil, grease and other water incompatible matter. The clean surface helps even distribution of DecKProtect. The surface remains clean when DecKProtect is removed and surface clean up will not be necessary for second time application. |
|
|
|
|
| |
Patch Test: |
|
|
|
|
| |
Always test a small inconspicuous area first. Because of various substrate characteristics and conditions like porosity, deterioration, embattlement, adverse wear area, type of ink, paint and or other coatings applied, abrasion of panted surfaces, and the like ,it is difficult to predetermine specific effects from this product. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Safety & Handling: |
|
|
|
|
|
| |
See application and safety precautions before applying. Liquid product is
slippery when wet. Please refer to MSDS. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Recommendations: |
|
|
|
|
|
| |
|
Outline your floor area to be protected with the self adhesive fiber tape. DO not overlap tap edges ,but keep adjacent |
|
For best results, wet roller with water and squeeze out excess water. For best overall results FloorPeel should be applied to a minimum of dry mils |
|
Apply DecKProtect and let it dry. Rinse out roller with plenty of water between coats |
|
Allow first coat to dry. dry time will be affected by coating thickness, application methods, humidity and air flow in the vicinity. Initial drying time is 30 minutes approximately. |
|
Apply second coat and allow it to dry before permitting traffic on the floor. |
|
|
|
|
|
|
|
|
|
|
|
|
 |
Curing: |
|
|
|
|
|
| |
DecKProtect cures upon water evaporation. Dry time is
dependent upon temperature, humidity, air movement and thickness of the coating. Curing may be accelerated by forced dry air up to 100 degrees Fahrenheit.
Force dry coatings can cure in less than 10 minutes. Most coatings without assist will dry in a few hours. It is
imperative that DecKProtect be thoroughly cured and dry, before an attempt is made to peel the coating from the substrate. Cured coating is clear throughout. Cured DecKProtect is water resistant. Floors coated with DecKProtect can be water mopped. |
|
|
|
|
|
|
|
|
|
|
|
 |
Storage: |
|
|
|
|
|
| |
DecKProtect should be
stored in the original shipping container with temperatures between 60 and 90 degrees F. Container should be sealed until needed. Protection from freezing is necessary. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Removal: |
|
|
|
|
|
| |
4980 is readily removed from surfaces by peeling any exposed edge. This Peelable coating can be
removed by prying an edge and slowly lifting the coating off the floor. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Physical Characteristics: |
|
|
|
|
|
| |
Color: White when wet. Clear when dry.
Weight: 9.92 Lbs./Gallon
Viscosity: 50-60" on Zahn #2 cup at 77 degrees Fahrenheit
Flashpoint: None
|
|
|
|
|
| |
Some Equipment Notes: |
|
|
|
|
| |
Airless System: Recommended tip size is .070, similar to a glue tip. |
|
|
|
|
| |
Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification. |
|
|
|
|
|
|
|
|
|
|
