|
 Tile
Protection Liquid Sheet, Tile
Protection Film ,Tile Protective
Grouting Aid
Protect tiles during grouting
Liquid, water-repellent agent for
protection of non porous tiles and
stone from grout deposits...
Before
you start grouting apply
TileProtect-2810 evenly over the
entire surface in order to protect
the tiled surface from becoming
soiled by grout.
This allows the tiles to be
protected during grouting without
running the risk of it adhering to
the tiled surface.
Tile Protect 2810 Grouting Aid
greatly reduces the absorbency of
the tiles and at the same time
prevents the grout deposits from
setting on the surface of the tiles.
However it does prevent the grout
from adhering to tiles.
|
|
|
|
|
|
 |
|
Protective
Film TileProtect 2810
For Tiles During And After
Grouting |
|
|
|
|
|
| |
Tile Protection Liquid Sheet, Tile
Protection Film ,Tile Protective
Grouting Aid |
|
| |
TileProtect 2810 is Water Based Water
resistant Peelable coating for
tiles during grouting and after to
eliminate cleaning. |
|
|
|
|
| |
...Grout - mortar - paint
splashes.......expensive replacement... |
|
|
|
|
| |
This economic Peelable coating is
also used within the building
industry for scratch and stain
protection . |
|
|
|
|
|
|
|
| |
 |
Customer Comments: |
|
|
|
|
|
| |
virtually eliminates repairs and
reduces clean up costs during construction and renovation.
This protective coating for tiles is
removed in one piece like a film enclosing all trash and
debris revealing a tile in showroom
condition! |
|
|
|
|
| |
TileProtect 2810-water based
protective strippable coatings
dries to form a durable temporary
protective strippable coating that
protects from damage during construction phase. |
|
|
|
|
| |
Simply Paint On & Peel Off |
|
|
|
|
| |
TileProtect 2810 Protective strippable
coating For tiles
is the revolutionary product
developed by General Chemical
Corp... |
|
|
Typical Customer inquiry : |
|
| |
we are producers of ceramic wall
tiles. Our production range includes
peculiar tiles finely engraved with
bas-reliefs, which sometimes creates
some problems during grouting with
standard cement grouts. The grout
goes into the narrow engravings 1 mm
deep, making cleansing very
difficult. We thought about applying
a thin protective film on the tiles,
before packaging them to completely
isolate them. In this way, they
could be laid down without being
damaged. The film should then be
removed after the laying. We kindly
ask you to make us some proposal.
Please, consider that being
exclusive tiles, the sqmt sold are
hundreds per month. We thank you in
advance and remain with our |
|
|
|
|
| |
Our Recommendation :
TileProtect 2810 |
|
|
|
|
| |
TileProtect 2810 is available by
direct order, and through
distributors and agents worldwide. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Benefits To You: |
|
|
|
|
|
| |
|
Cost effective solution From damage |
|
Virtually eliminates repairs
caused during construction |
|
Provides Temporary protection
through final inspection |
|
Replaces crude or ineffective
liner materials |
|
Value added service for
buyer's satisfaction |
|
Professional image for
contractor and builder |
|
|
|
|
|
| |
Comparison Chart |
|
| |
|
No |
Features |
Oil Spray |
Protective Plastic Sheet |
TileProtect 2810 |
| 1 |
General Construction Industry |
Voids Warranty |
Y |
Y |
| 2 |
Warranty on Non porous tiles |
|
Y |
Y |
| 4 |
Protects non porous tiles |
|
Sometimes |
Y |
| 5 |
Protects nonporous
tiles before
painting? |
can effect it |
Y |
Y |
| 6 |
Protection form weather
elements |
|
Y |
Y |
| 7 |
Surface protection and
effectiveness including
quality of factory Glazing |
can effect it |
Y |
Y |
| 8 |
Protective coatings exposure
in Months |
short term |
up To 3 months |
Up to a year |
| 9 |
Ease of Cleaning |
Messy |
cumbersome |
Y |
| 10 |
Durability of protection from
exposure to exterior
conditions |
|
|
Y |
| 11 |
Helps avoid acid etching and
staining caused by water
entrapment |
Y |
|
Y |
| 12 |
Residues left and post
cleaning after coating is
removed |
Requires cleaning |
|
None Left |
| 13 |
Ease of removal of protective
coating
|
chemical cleaning |
Mechanical means |
Peel it off and roll it off in
a little ball! |
| 14 |
Tangible and Intangible costs
including labor |
|
effective |
Very effective |
| 15 |
environment friendly
|
|
|
yes |
| 16 |
Biodegradability |
|
|
yes |
|
|
|
|
|
| |
According to industry data,
20% of tiles are damaged during
construction and require repair
before the home can be sold. |
|
|
|
|
| |
If you have ever walked a
construction job, you have seen the
tiles splattered with
construction material and the
staining and scratching that results
from this practice. |
|
|
|
|
| |
Once the equipment is returned and
the final cleanup is scheduled, the
protective coating is peeled away in
one piece to form a film enclosing
all trash and debris, revealing in showroom condition! |
|
|
|
|
| |
TileProtect 2810 Protective Peelable
coating , virtually abolishes
repairs and reduces cleanup costs.
Also, since all paint overspray is
on the TileProtect 2810 coating, you
eliminate the use of harsh flammable
solvents to remove the overspray.
Many of these solvents can dull and
weaken fiberglass or acrylic
surfaces. |
|
|
|
|
| |
|
|
|
|
|
| |
TileProtect 2810 protects against
scratches, abrasions and job site
dirt and grime. Easy-to-apply, the
water-based coating cures to a
durable, easy-to-remove "protective
skin." One gallon covers
approximately 180 square feet. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Performance Tests : |
|
|
|
|
|
| |
 |
 |
|
|
|
|
| |
UV Exposure Study: The two sets of
pictures represent the equivalent to
6 months and 12 months exposure to
UV light using a controlled
irradiance water cooled XENON ARC
apparatus and run to SAE J1960
ACCELERATED EXPOSURE OF AUTOMOTIVE
EXTERIOR MATERIALS. |
|
|
|
|
| |
Three sets of coatings were tested:
1) TileProtect 2810 - as is (on the
left)
2) TileProtect 2810- with UV adds
(middle) |
|
|
|
|
| |
OVERALL all sets exposed quite well
and the test resulted in good
integrity. 4930 and the competitor's
product presented very similar
results whereas the 2810UV was
almost perfect after the 6 month
test and much better than the other
two after the 12 month conditions. |
|
|
|
|
|
|
|
| |
Patch Test: Because it is difficult
to determine the type of substrate
of the tile ,perform a small test first.
This will determine 2810
effectiveness, coverage, and the
approximate amount of time required
for it to work. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Application: |
|
|
|
|
|
| |
TileProtect 2810, a protective
peelable mask for door, is easy to
brush on. Brushes can be cleaned
with soap and water. TileProtect 2810,
a protective peelable mask for door,
is normally used as received, it can
be applied by air or airless spray,
roll coating, or brushing. Apply
product evenly to produce a dry film
thickness of approximately 7-10 mils
or wet film thickness of 14 to 20
mils.. Drying time is dependent on
temperature. At 70ºF, product will
dry in approximately 24 hours. You
can enhance drying time by air
movement and other suitable means. |
|
|
|
|
| |
Structured Assemblies: Will not
affect silicone joint - ensure they
are cured prior to film application. |
|
|
|
|
| |
Renovation: Apply to
tile that is
to remain 'in situ', to give
excellent protection during the
course of building alteration. |
|
|
|
|
| |
Can TileProtect 2810 strippable
coating be sprayed? |
|
|
|
|
| |
Yes, you can spray it. Preferred
method is roll or brush on which
helps control necessary film
thickness to facilitate its
removal.Spray method can cause
feather edges and the peelable
coating film becomes difficult to
remove. |
|
|
|
|
| |
Application Guidelines: |
|
|
|
|
| |
|
Apply only with rollers. The
use of other methods may apply
the product too thinly causing
the product to be difficult to
peel off. |
|
Do
not apply the product: in rain
or when the temperature is below
40F ( 3°C) |
|
Do
not remove the product: Until
fully cured - generally 4-24
hours depending upon temperature
and airflow. Product can remain
in situ for up to 12 months in
temperature below 32F (0°C) With
any sharp implements. Simply
peel off from one corner. |
|
If
the product is to be applied to
framework, aluminum or PVC once
'touch dry', apply a second
coat; do not coat handles or
locking mechanisms . Do not coat
where there is likelihood a
vent/door may be opened. |
|
Do
not store the product where it
may freeze. |
|
Ideally, apply towards the end
of a working day. |
|
When
trained, an applicator should,
dependant on site conditions, be
able to cover between 270– 540
sq Ft (25-50m2) per hour. |
|
Immediately Wash out rollers and
all other equipments with clean
water after use. |
|
Any
unused volume of product left in
the roller tray may be returned
to the storage drum providing it
has not begun to set. |
|
Ensure all opened drums are
resealed when not in use and
during transportation. |
|
Has a
shelf life in excess of 12
months when unopened and keep
the container closed when not in
use. |
|
|
|
|
|
| |
One liter of Peelable coating
applied with the roller will cover
65-86 sq Ft (6-8m2) |
|
|
|
|
| |
IMPORTANT: do not use 'off the shelf' general decorating rollers; these may not apply the product at the correct consistency. |
|
|
|
|
| |
Before applying , carefully examine the fixture for any pre-existing damage. If damaged, contact the builder or owner before proceeding with installation of the coating. Do not apply to porous surfaces. |
|
|
|
|
| |
TileProtect 2810 may also be diluted at the rate of one to four ounces of water per quart. The sprayed coating dries, depending on the film thickness, in 30 minutes to 4 hours. is applied to yielding a dry film from one to ten mils (.001" to .010") thick. The coating is resistant to attack by solvents used in paint. Application temperatures range from 120º F. to no lower than 45º F. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Removal: |
|
|
|
|
|
| |
TileProtect 2810 can be removed by peeling. will turn white when wet but it will not come off unless peeled.
TileProtect 2810 water resistant when it is dry film. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Saftey & Handling: |
|
|
|
|
|
| |
Avoid breathing vapors/mists that occur during spraying – wear a painter’s mask or other suitable respiratory device when applying this product. Avoid skin and eye contact. Do not allow product to freeze. Keep container closed when not in use. Store in a clean dry area with a minimum temperature of 50ºF. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Flammability: |
|
|
|
|
|
| |
Water Resistant Doorshield presents no fire hazard as received, during, or after application.
TileProtect 2810 is non-flammable in liquid or dry state. |
|
|
|
|
|
|
|
|
|
|
|
 |
Disposal: |
|
|
|
|
|
| |
protective Peelable coating Doorshield is disposed like paint films ad other solid materials. |
|
|
|
|
|
|
|
|
|
|
|
 |
Packaging: |
|
|
|
|
|
| |
TileProtect 2810 is available in 1gallon,5 gallon,55 gallon & 110 gal/220 gal disposable tote tanks. Totes feature an inner bladder that collapses as product is dispensed, ensuring that all product is usable over the life of the container in service. |
|
|
|
|
| |
Also available in different colors for additional costs. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Operating Guidelines: |
|
|
|
|
|
| |
1.When applying, use the same protection as used while applying paint. |
|
|
|
|
|
|
|
| |
First Time Application: |
|
|
|
|
| |
I. Cleaning of equipment: |
|
|
|
|
| |
clean immediately with water after use. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Testimonials: |
|
|
|
|
|
| |
"We are looking for some type of Industrial coating to protect our
tilet from grout . We need to be able to remove this coating . Can you help us?? Thanks!! ""We used some of your
TileProtect 2810, and the stuff works great! It
rolled on cloudy, but when it cured it was clear. It surprised us all. I'll recommend this stuff
" |
|
|
|
|
| |
Tile Protection Liquid Sheet, Tile
Protection Film ,Tile Protective
Grouting Aid |
|
|
|
|
|
|
|
|
|
|
