 |
Products |
|
Solvent Based Peelable Coating Special Features |
|
Our Highest viscosity Solvent Based strippable coating engineered for high film depositss; excellent water and acid resistant to 200F
Color: Clear, can be tinted
Application : Brush and Dip only
Substrates: M; TS; G
Liquid Mask 4300 :
Color: Blue |
|
Solvent Based, Silicon Wafers, Glass, Photo masks, Platter, Optical Media Blue Tint Lower viscosity, Excellent water and acid resistant properties
Color: Blue
Application : SP
Substrates: M; TS; G
Stripcoat 2100 same as Disccoat 4210 with no tint-clear film. |
|
Solvent Based Clay Modeling: For Prototypes, Strippable excellent water and acid resistant solvent based Peelable coating for applications like clay modeling, concept cars, prototypes. Low viscosity for air assisted spray and brushable.
Color: Aluminum
Application : AA
Substrates: M; TS; G |
|
Solvent Based Temporary Protective Peelable strippable Black Coating For excellent hiding properties to protect from light sources For Optical Mirrors, Silicon Wafers, Glass, Photo masks, Platter, Optical Media, Optical Disc And leaves no oily residues.
Color: Black, can be tinted
Application : AA, BR, SP
Substrates: M; TS; G |
|
Products |
|
Water Based Peelable Coating Special Features |
|
Water Based Viscous Peelable coating for walls, ceilings, floors, windows and light fixtures: one coating to do it all When cured: resistant to water, alkali and heat
Color: Clear
Application : AL ,BR
Substrates: M; TS; G |
|
Water based White Peelable coatings For Paint Spray Booth Walls
Color: White
Application : AL ,BR
Substrates: M; TS; G
|
|
Water Based Peelable clear for glass windows, light fixtures PeelKleer_2960 More viscous than Peelkleer 5358
Color: Blue Application : AA; BR; R
Substrates: A; M; G; TS |
|
Water Based Invisible Bra For Bumpers, Lenses, Lamps and skirts of transportation vehicle temporary protection against stone chips, bug damage, abrasion and weathering while allowing a vehicle's color brilliance to show through and its design intent to be maintained
Paintshield 4580 : Higher Viscosity Industrial Grade
Paintshield 5720 :spray bottle consumer grade
Color: Clear
Application :AA,BR,R
Substrates: A; G; M; TS; P; W |
|
Water Based Silicon Wafers, Glass, Photo masks, Platter, Optical Media
Color: Blue
Application : SP
Substrates: G; A; TS; P |
|
Water Based Peelable coating-heavy duty with traction control for industrial floors to drive forklift , heavy foot traffic.
We recommend 10-12 mils wet!
Color: Clear, can be tinted
Application : AA; R;BR
Substrates: M; G; P; concrete |
|
Peelable stop-off formulated specifically for electroless nickel, hard coat anodizing and chemical milling. Screen printable Peelable film.
Color: Blue
Application : BR, Dip
Substrates: Plated Surfaces |
|
Water Based Temporary Background For Bar Codes
Color: Gray Clear, can be tinted
Application : Brush, Airless Spray Only
Substrates: M; TS; G |
|
Water Based can be applied by silk screening such as in appliance manufacturing and drying time can be reduced with heat lamps
Color: Clear
Application : AA; SP
Substrates: M; G; TS; P; A |
|
Water Based Neon Color Peelable coating For temporary decoration such as Shopping Mall Glass Windows
Color: Neon color
Application : AL
Substrates: G; M; P; TS |
|
A strippable coating for temporary masking of acrylics, plastics polystyrene and painted surfaces
Color: Blue
Application : AL
Substrates: A; TS; P |
|
Water Based Black Peelable coating for light absorption. Good peel on glass . Available in different colors.
Color: Black
Application : AL; B; R
Substrates: G; M; TS; P |
|
Our General Purpose workhorse Medium Viscosity Water Based Water Resistant Peelable coating for various applications to temporarily protect surface from exterior and interior environment , prevent damage and scratches including glass, good sag resistance. Low temperature curing and low viscosity for air assisted spray.
Color: Clear, can be tinted
Application : AA; R; B
Substrates: A; TS; M; P; G; W |
|
Water Based Viscous Peelable coating for variety of surfaces: one coating to do it all. When cured: resistant to water, alkali and heat.
Color: Clear, can be tinted
Application : AL; R; BR
Substrates: A; G; M; TS; P; W |
|
Water Based Water resistant Peelable coating for Bathtubs, whirlpools, and for Showers. Home Builders: various applications to temporarily protect surface from exterior and interior environment, prevent damage and scratches including glass
TUBCOAT REQUIRES 9 TO 10 MILS WET...PLEASE LOOK BELOW AT CHART
For glass doors ,windows ,concrete during construction,
Color: Blue
Application : AL
Substrates: A; TS; P; G |
|
Products |
|
Hot Melt Peelable Coating Special Features |
|
Hot Melt Peelable Coatings |
|
Products |
|
UV Curable Peelable Coating Special Features |
|
UV Curable Peelable Masks |
|
|
|
|
Approximate Square Feet Coverage Per Gallon of General Chemical's Peelable coatings:
Note: For most applications 3 mil of dry coating is needed for peelability. |
|
Water Based coating's Wet films to Apply In Mils |
4.5 |
6 |
9 |
11 |
13 |
14 |
16 |
18 |
21 |
| Square feet of Coverage per Gallon |
401 |
267 |
194 |
155 |
129 |
111 |
97 |
86 |
75 |
| Dry Film Build Required In Mils |
2.5 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
| Solvent based coating's wet films to apply |
6.6 |
10 |
13 |
|
|
|
|
|
|
| Square feet of Coverage/Gallon |
250 |
160 |
50 |
|
|
|
|
|
|
|
| Packaging : 1,5,55 gallons ,Totes and Tankers |
 |
|
| Typical Customer Inquires: |
| 1: "Seeking temporary coating to be applied to finely finished (16-4 Ra) surfaces on Aluminum and stainless steel machined components. Coating must air dry quickly and protect the finish from scratches during subsequent operations. Must strip away clean prior to shipment. Brush-on and/or dip. Currently using masking tape." |
|
Recommendation : For aluminum or stainless steel, by roll or brush application, PaintShield 5720 applied wet 6 to 8 mils can be dried with fan and hot air (140F) in less than 10 minutes. This is a water based product and the applied film will proceed from white phase to clear and cured state. Water must evaporate for the Peelable coating to work.
Liquid Mask 4210, solvent based applied to 6 to 8 mils wet, can dry in 5 minutes with the same fan and hot air as above. In each case solvent must evaporate from the film to attain proper peelable coating properties.
2.We use a spray on Maskant product at our facility also known as Elephant Hide. This is a messy, expensive, and unpredictable process but it is necessary when wanting to do a PAA or PAD process to one side of an aluminum skin and not the other. Do you know of a product out on the market that would be easier to use. I was thinking about some type of a roll film adhesive that could handle the charged tank and phosphoric acid. I know the mil thickness is important to make sure there is a good heavy coat. I saw you have a brush on product. We are spending a lot of money in overspray, drop, and wasted dried out product they wasn’t used up on off shifts. It plugs up the pumps, hoses, and guns frequently which creates more than desired downtime. Do you have any suggestion. |
|
| Recommendation : Liquid Mask 4300, blue transparent, solvent based peelable coating, and we have versions of this without color, can be brushed or rolled. Dried film are very resistant to acids, 24 hours at 160F. This might be worth a try. |
|
How to apply: (AA= Air Assisted Spray; AL=Airless Spray; BR=Brush; R=Roll; SP-Spin)
Substrates: A=Acrylic; G=Glass; M=Metals; P=Painted Surface; TS=Thermo set plastics; W=Non porous wood surface PC=Polycarbonates) |
|
| SHIPPING CONDITIONS: We ship water based coaitngs and products during winter months on the days when temeprature is above freezing32F. |
| |
|
