|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Temporary
Protective Peelable Coating For
Furniture Glass & Non Porous Wood
and Furniture Surfaces |
|
| |
 |
|
|
|
|
| |
Temporary Protective Peelable
Coating For Furniture Glass & Non
Porous Wood and Furniture Surfaces
|
|
| |
water based, water
resistant, peelable coating for
Furniture. various applications
to temporarily protect surface from
interior environment, prevent damage
and scratches including glass and
non porous surfaces such as
table top |
|
| |
Typical Customer inquiry:
As a wholesale furniture showroom,
we purchase all kinds of tables with
glass tops. We purchase these tables
to show our customers the different
styles available from the
manufacturers we represent. Our
customers can either order from
these tables, or they can purchase
these tables right off our floor. We
have had an ongoing problem of the
glass getting scratched when
accessories are displayed on them,
or when customers set personal items
on them. We are looking for a clear
coating which could be applied when
the tables arrive. The coating would
probably need to be replaced from
time to time depending on the age of
the table. We can also recommend and
sell the product to our customers
whose clients require glass
protection in active environments.
This would be for indoor use only.
The big question is the coating
clear so that you almost don't know
its there. We cannot have something
that will interfere with the proper
merchandising of the piece.
Customer Inquiry :I
would like to get some information
on the Peelkleer 1850 product. We
produce a very high end wood
furniture product that we would like
to protect more as we ship it.
Customer Inquiry :
Hello
we are a furniture manufacturing
company located in Turkey.We create
classical furniture (attached a
picture).in our finishing production
we use 2 tone finishes such as
background color and gold paint.as
you can imagine classical furniture
does not have straight line so that
it is very hard to do the second
tone without masking .if we use old
style masking then it takes forever
in the masking process .what i was
wondering with your product is can i
paint your mask and peel the areas i
would like to do the second color
and peel it all before the top coat.
can that be done and do you have a
distributor in turkey .Please let me
know how we can make our production
line go faster thank you
Our Recommendations :
Woodshield 5980 is a water based
peelable coating that cures upon
water evaporation. Cured films
should perform for this
application..5980 has more adhesion
and that will be needed here to cut
straight lines |
|
| |
Our Recommendation :
PeelKleer 1830
| |
 |
Products |
|
Temporary Protective Peelable Coating For
Furniture Glass & Non Porous Wood and
Furniture Surfaces |
|
Water based peelable protection for
Furniture Glass & Non Porous Wood and Other
Surfaces . for indoor protection only. Water
soluble film
Color:
White when wet. Clear when dry |
|
Water based peelable protection for
Furniture Glass & Non Porous Wood and Other
Surfaces. when dried, water resistant film.
For indoor and outdoor protection
Color:
White when wet. Clear when dry |
|
|
|
|
|
|
|
| |
Customer Testimonial: "We are
looking for some type of temporary
coating to protect our Furniture
from damage and scratch. We need to
be able to remove this coating. Can
you help us?? Thanks!! ""We used
some of your PeelKleer , and the
stuff works great! It sprayed on
cloudy, but when it cured it was
clear. It surprised us all. I'll
recommend this stuff to any
furniture showroom or manufacturer." |
|
| |
...Glass-Non Porous Wood - Customer
Handling....scratched glass &
Furniture.....expensive
replacement... |
|
| |
This economic Peelable coating is
used within the Furniture industry
for scratch and Damage protection. |
|
| |
 |
Customer Comments: |
|
|
|
|
|
| |
Virtually eliminates repairs and
reduces replacement costs
during showroom period. This
protective coating for furniture
is removed in one piece like a big
piece of saran wrap revealing a
protected surface in showroom
condition! The total cost adds less
than $1 to 2 of coating to an
average $700 Furniture! |
|
| |
Simply Paint On & Peel Off |
|
| |
PeelKleer is available by direct
order, and through distributors and
agents worldwide. |
|
|
|
|
| |
 Benefits: |
|
|
|
|
Cost effective solution for
from damage and time
consuming replacement |
|
Virtually eliminates repairs
caused during Handling |
|
Provides Temporary protection
through final inspection |
|
Replaces crude or ineffective
liner materials |
|
Value added service for
buyers satisfaction |
|
professional image for Furniture
suppliers |
|
|
| |
Comparison Chart |
|
|
|
No |
Features |
Protective Plastic Sheet |
PeelKleer 5980 |
| 1 |
Furniture Industry |
Y |
Y |
| 2 |
warranty on Non porous Wood
Tops |
Y |
Y |
| 3 |
warranty on glass |
|
Y |
| 6 |
Protection form weather
elements |
Y |
Y |
| 7 |
Surface protection and
effectiveness including
quality of factory |
Y |
Y |
| 8 |
Protective coatings exposure
in Months |
up To 3 months |
Up to a year |
| 9 |
Ease of Moving Furniture |
cumbersome |
Y |
| 10 |
Durability of protection
from exposure to Interior
conditions |
|
Y |
| 11 |
Helps avoid acid etching and
staining caused by water
entrapment |
|
Y |
| 12 |
Residues left and post
cleaning after coating is
removed |
|
None Left |
| 13 |
Ease of removal of
protective coating
|
Mechanical means |
Peel it off and roll it off
in a little ball! |
| 14 |
Tangible and Intangible
costs including labor |
effective |
Very effective |
| 15 |
environment friendly
|
|
yes |
| 16 |
Biodegradability |
|
yes |
|
|
| |
According to industry data, 30% of
used and Furniture's are damaged
during show room and require repair. |
|
|
PeelKleer Protective Peelable
coating , virtually abolishes
repairs and reduces cleanup costs. |
|
| |
 |
Click Here for Frequently Asked
Questions:
PeelKleer protects glass,
frames ,non porous furniture
surface against scratches,
abrasions and show room dirt and
grime. Easy-to-apply, the
water-based coating cures to a
durable, easy-to-remove
"protective skin." One gallon
covers approximately 200 Sq Ft. |
|
|
| |
Strippable Coating LLC's protective
peelable coatings for Furniture:
PeelKleer is a protective strippable
coating engineered for use on wide
variety of non porous surfaces.
Typical applications include where a
temporary protective coating is
desired to protect the surface form
damage, scratches, chipping and from
exterior and interior environments..
Depending on the thickness of the
wet film; dry film thickness can
range from one to ten mils. Thin
films are clear while thicker films
are translucent. during
manufacturing and shipping.
PeelKleer represents the ultimate in
non-solvent, water borne, strippable
coatings. |
|
| |
 |
Performance Tests : |
|
|
| |
Patch Test: Because it is
difficult to determine the type of
substrate of the furniture such as
type of acrylic ,perform a small
test first. This will determine
peelKleer effectiveness, coverage,
and the approximate amount of time
required for it to work. |
|
| |
 |
Application: |
|
|
|
|
|
| |
PeelKleer , a protective peelable
mask for is easy to apply.
Brushes can be cleaned with soap and
water. PeelKleer , a protective
peelable mask for door, is normally
used as received, it can be applied
by air or airless spray, roll
coating, or brushing. Apply product
evenly to produce a dry film
thickness of approximately 7-10 mils
or wet film thickness of 14 to 20
mils.. Drying time is dependent on
temperature. At 70?F, product will
dry in approximately 24 hours. You
can enhance drying time by air
movement and other suitable means.
Procedure for General Chemical
Corporation PeelKleer 1850, used to
create a temporary peel away
protective coating for glass and
wood table tops, developed with
“To The Trade†furniture dealer and
showroom.
Procedure:( Actual procedure used
and written by Furniture Showroom)
Procedure for General Chemical
Corporation PeelKleer 1850, used to
create a temporary peel away
protective coating for glass and
wood table tops, developed by Design
Center Associates. Design Center
Associates is a “To The Tradeâ€
furniture dealer and showroom.
Procedure:
Prepare glass or wood
Clean surface thoroughly. Remove any
scratches, dirt, dust and debris.
Use masking tape around entire edge
of surface to create a barrier that
will contain product to surface top
and prevent dripping.
Product: Peelkleer 1850
Application Apparatus:Central
Pneumatic Touch-up Spray Gun #93974
with compressor at 40 psi. or
similar.
Application procedure:
Spray entire surface with product.
One coat should be sufficient.
Repeat two to three times if heavy
usage is anticipated. Do not allow
product to dry in-between layers.
Product will turn frosty white
before drying crystal clear. Product
will be bumpy and pitted before
drying to a smooth surface.
Additional Information:
Apply at room temperature of 75
degrees or above to facilitate quick
dry which will help prevent
particulate matter from adhering to
wet film. Drying time is
approximately 2 hours.
Coating peals away in one piece when
no longer needed.
Five ounces of solution will cover a
surface of approximately 36â€x48â€.
NOTE: makes no
guarantee on this product’s
performance and will not be held
responsible for any damages. |
|
| |
Renovation: Apply to glass
that is to remain 'in situ', to give
excellent protection during the
course of showroom handling. |
|
| |
Can PeelKleer strippable coating be
sprayed? |
|
| |
Yes, you can spray it. Preferred
method is roll or brush on which
helps control necessary film
thickness to facilitate its removal.
Spray method can cause feather edges
and the peelable coating film
becomes difficult to remove. |
|
| |
Application Guidelines: |
|
| |
|
Apply only with rollers. The
use of other methods may
apply the product too thinly
causing the product to be
difficult to peel off. |
|
Do
not apply the product: in rain
or when the temperature is below
40F ( 3?C) |
|
Do
not remove the product: Until
fully cured - generally 4-24
hours depending upon temperature
and airflow. Product can remain
in situ for up to 12 months in
temperature below 32F (0?C) With
any sharp implements. Simply
peel off from one corner. |
|
If
the product is to be applied to
framework, aluminum or PVC once
'touch dry', apply a second
coat; do not coat handles or
locking mechanisms . Do not coat
where there is likelihood a
vent/door may be opened. |
|
Do
not store the product where it
may freeze. |
|
Ideally, apply towards the end
of a working day. |
|
When
trained, an applicator should,
dependant on site conditions, be
able to cover between 270– 540
sq Ft (25-50m2) per hour. |
|
Immediately Wash out rollers and
all other equipment with clean
water after use. |
|
Any
unused volume of product left in
the roller tray may be returned
to the storage drum providing it
has not begun to set. |
|
Ensure all opened drums are
resealed when not in use and
during transportation. |
|
Has a
shelf life in excess of 12
months when unopened and keep
the container closed when not in
use. |
|
|
| |
One liter of Peelable coating
applied with the roller will cover
65-86 sq Ft (6-8m2) of glazing. |
|
| |
IMPORTANT: do not use 'off
the shelf' general decorating
rollers; these may not apply the
product at the correct consistency. |
|
| |
 |
Removal: |
|
|
| |
PeelKleer can be removed by peeling.
will turn white when wet but it will
not come off unless peeled.
PeelKleer water resistant when it is
dry film. |
|
|
|
|
| |
 |
Safety & Handling: |
|
|
| |
Avoid breathing vapors/mists that
occur during spraying – wear a
painter’s mask or other suitable
respiratory device when applying
this product. Avoid skin and eye
contact. Do not allow product to
freeze. Keep container closed when
not in use. Store in a clean dry
area with a minimum temperature of
50?F. |
|
|
|
|
| |
 |
Flammability: |
|
|
| |
Water Resistant presents no
fire hazard as received, during, or
after application. PeelKleer is
non-flammable in liquid or dry
state. |
|
|
|
|
|
 |
Disposal:
protective Peelable coating is
disposed like paint films ad
other solid materials. |
|
|
|
|
|
|
 |
Packaging: |
|
|
| |
PeelKleer 5980 is available in
1gallon,5 gallon,55 gallon & 110
gal/220 gal disposable tote tanks.
Totes feature an inner bladder that
collapses as product is dispensed,
ensuring that all product is usable
over the life of the container in
service. |
|
| |
Also available in different colors
for additional costs. |
|
|
|
|
| |
 |
Operating Guidelines: |
|
|
| |
1.When applying, use the same
protection as used while applying
paint. |
|
| |
First Time Application: Cleaning of
equipment:
Clean
immediately with water after use. |
|
|
|
|
| |
 |
Testimonials: Virtually
eliminates repairs and reduces
replacement costs during
showroom period. This protective
coating for furniture is removed
in one piece like a big piece of
saran wrap revealing a protected
surface in showroom condition!
The total cost adds less than $1
to 2 of coating to an average
$700 Furniture! |
|
|
| |
Temporary Protective Peelable
Coating For Furniture Glass & Non
Porous Wood and Furniture Surfaces
|
|
|
|
|
|
|
|
