Paintshield Masking film is
engineered for water and UV
resistance and is used for temporary
protection during transport,
storage, processing and handling.
The coatings
are easily applied by spray and will
offer protection against abrasion,
dirt and staining to all non porous
surfaces including paintwork,
stainless steel, glass and plastic.
The
benefits over plastic packaging are
the waterproof “skin tight” nature
of the protection which will not
deteriorate or blow away. It will
not bake on to the surface or leave
adhesive marks at ambient
temperature below 100F.
|
|
|
|
|
Equipment
Protective Peelable Coating
,Equipment Protection Liquid Masking
Tape, Equipment Protective Film |
|
   |
|
|
Temporary Protective Coatings,
Strippable Coatings For Equipment
such as Lifts,Farm Equipment: |
|
 |
|
|
Paintshield is water based, water
resistant, peelable coating for
Equipment. various applications
to temporarily protect surface from
exterior and interior environment,
prevent damage and scratches
including glass. |
|
 |
Products |
|
Equipment Protective Peelable Coating
, Painter Liquid Masking Tape,
Equipment Protective Film |
|
Water based peelable protection for
Equipment
Color:
White when wet. Clear when dry.
Flashpoint: None |
 |
Metal_Protect_5000 |
|
For the protection of painted and powder
coated metal enclosures of electrical and
mechanical equipment. The enclosure is
typically exposed to welding splatter,
impact and scratch damage, paint splatter
etc. during construction and installation
phase, often in the close quarters of a
marine environment. Metal Protect 5000 will
protect the finish of the enclosure for a
year or more as the construction or retrofit
takes place around it. When the work is
completed the coating can be peeled off
leaving the equipment with an undamaged
finish and virtually residue free. |
|
|
|
...Cement - Mortar - Paint
Splashes......Scratched
Glass.....Expensive Replacement... |
|
|
This economic Peelable coating is
also used within the building
industry for scratch and stain
protection of equipment. |
|
|
|
 |
Customer Comments: |
|
|
|
Virtually eliminates repairs and
reduces clean up costs during rental
period, construction and renovation.
This protective coating for doors is
removed in one piece like a big
garbage bag enclosing all trash and
debris revealing a door in showroom
condition! The total cost adds less
than $30 of coating to an average
$175,000 equipment! |
|
|
Typical Customer inquiry:
I would like a recommendation for a
strippable coating that could be
applied to rental man lifts. These
lifts are rented by paint
contractors and are covered in
overspray when they are returned. |
|
Typical Customer inquiry:
We are in urgent need of a
protection spray for our CCTV dome
camera. We use a PC polycarbonate
dome in this product. And we need to
spray on a removable film.
The film has to be easy to remove
after production and handling.I
could see that you have a lot of
interesting products like this on
your web site, but I don’t know if
this is easy to remove and good to
use on PC plastic.2.I did read
your advertisement on the "net"
after looking for a suitable
peel-off temporary coating for our
ships hull topside. At this moment
we are building an FPSO 110.000
tonnes at shipyard, Singapore.
Between the coating application on
the topside (green) and the delivery
there will be a big outfitting
process ongoing which will give a
considering amount of contamination
on my Polyurethane finish coat.
Yes, Paint Shield was the product
we were using and I can tell you it
was a great product. After one year
on the hull we still had a clean new
ship. If you want I can send you
some photos when we are taking it
off the vessel. That's why we are
using it again.Our Recommendation:
Paintshield
2810 |
|
|
Paintshield is a Protective
strippable coating For equipment
such as lifts is the revolutionary
product developed by General
Chemical Corp.. |
|
|
Our customer in china wrote to us : |
|
|
The mirror surface of the lift for
high buildings need to be covered
and protected before installation
and operation. Currently, most lift
manufacturers cover and protect the
mirror surface of their lifts by
adhesive plastic films in China.
Mirror front is glass, therefore our
water based Paintshield 2810 (clear)
work well for this application. |
|
|
Paintshield is available by direct
order, and through distributors and
agents worldwide. |
|
|
|
 |
Benefits To You: |
|
|
|
|
Cost effective solution for
from damage and time
consuming cleanups |
|
Virtually eliminates repairs
caused during Storage,Shipping
and Transport |
|
Provides Temporary protection
through final inspection |
|
Replaces crude or ineffective
liner materials |
|
Value added service for Buyer's satisfaction |
|
professional image for equipment
suppliers |
|
|
|
According to industry data, 70% of
used and rental equipments are
damaged during construction and
require repair. |
|
|
If you have ever rented equipment,
you have seen the equipment
splattered with construction
material and excessive staining and
scratching. |
|
|
Once the equipment is returned and
the final cleanup is scheduled, the
protective coating is peeled away in
one piece to form a bag enclosing
all trash and debris, revealing a
lifts, elevators and other equipment
in showroom condition! |
|
|
Paintshield Protective Peelable
coating , virtually abolishes
repairs and reduces cleanup costs.
Also, since all paint overspray is
on the Paintshield coating, you
eliminate the use of harsh flammable
solvents to remove the overspray.
Many of these solvents can dull and
weaken fiberglass or acrylic
surfaces. |
|
|
|
|
Paintshield protects door glass,
frames ,doors against scratches,
abrasions and job site dirt and
grime. Easy-to-apply, the
water-based coating cures to a
durable, easy-to-remove "protective
skin." One gallon covers
approximately 200 Sq Ft. |
|
|
General Chemical Corp.'s protective
peelable coatings for equipment:
Paintshield is a protective strippable
coating engineered for use on wide
variety of non porous surfaces.
Typical applications include where a
temporary protective coating is
desired to protect the surface form
damage, scratches, chipping and from
exterior and interior environments.
Depending on the thickness of the
wet film, dry film thickness can
range from one to ten mils. Thin
films are clear while thicker films
are translucent. The application of
Paintshield coatings will protect
surfaces from paint overspray or
damage during manufacturing and
shipping. Paintshield represents the
ultimate in non-solvent, water
borne, strippable coatings.
Paintshield does not contain VOCs. |
|
|
|
 |
Performance Tests : |
|
|
 |
 |
|
|
|
|
UV Exposure Study: The two
sets of pictures represent the
equivalent to 6 months and 12 months
exposure to UV light using a
controlled irradiance water cooled
XENON ARC apparatus and run to SAE
J1960 ACCELERATED EXPOSURE OF
AUTOMOTIVE EXTERIOR MATERIALS. |
|
|
Three sets of coatings were tested: 1) Paintshield 2810 - as is (on the
left)2) Paintshield 2810- with UV adds
(middle) |
|
|
OVERALL all sets exposed quite well
and the test resulted in good
integrity. 2810UV was almost
perfect after the 6 month test and
much better than the other two after
the 12 month conditions.
Peeling of the two Paintshield was
very easy. |
|
|
Patch Test: Because it is
difficult to determine the type of
substrate of the door frame such as
type of acrylic ,perform a small
test first. This will determine
effectiveness, coverage, and the
approximate amount of time required
for it to work. |
|
 |
Application: |
|
|
|
Paintshield , a protective peelable
mask for door, is easy to brush on.
Brushes can be cleaned with soap and
water. Paintshield , a protective
peelable mask for door, is normally
used as received, it can be applied
by air or airless spray, roll
coating, or brushing. Apply product
evenly to produce a dry film
thickness of approximately 7-10 mils
or wet film thickness of 14 to 20
mils.. Drying time is dependent on
temperature. At 70?F, product will
dry in approximately 24 hours. You
can enhance drying time by air
movement and other suitable means. |
|
|
|
|
Structured Assemblies: Will
not affect silicone joint - ensure
they are cured prior to film
application. |
|
|
Renovation: Apply to glass
that is to remain 'in situ', to give
excellent protection during the
course of building alteration. |
|
|
Can Paintshield strippable coating be
sprayed? |
|
|
Yes, you can spray it. Preferred
method is roll or brush on which
helps control necessary film
thickness to facilitate its removal.
Spray method can cause feather edges
and the peelable coating film
becomes difficult to remove. |
|
|
Application Guidelines: |
|
|
Apply only with rollers. The
use of other methods may
apply the product too thinly
causing the product to be
difficult to peel off. |
|
Do
not apply the product: in rain
or when the temperature is below
40F ( 3?C) |
|
Do
not remove the product: Until
fully cured - generally 4-24
hours depending upon temperature
and airflow. Product can remain
in situ for up to 12 months in
temperature below 32F (0?C) With
any sharp implements. Simply
peel off from one corner. |
|
If
the product is to be applied to
framework, aluminum or PVC once
'touch dry', apply a second
coat; do not coat handles or
locking mechanisms . Do not coat
where there is likelihood a
vent/door may be opened. |
|
Do
not store the product where it
may freeze. |
|
Ideally, apply towards the end
of a working day. |
|
When
trained, an applicator should,
dependant on site conditions, be
able to cover between 270– 540
sq Ft (25-50m2) per hour. |
|
Immediately Wash out rollers and
all other equipment with clean
water after use. |
|
Any
unused volume of product left in
the roller tray may be returned
to the storage drum providing it
has not begun to set. |
|
Ensure all opened drums are
resealed when not in use and
during transportation. |
|
Has a
shelf life in excess of 12
months when unopened and keep
the container closed when not in
use. |
|
|
|
|
|
One liter of Peelable coating
applied with the roller will cover
65-86 sq Ft (6-8m2) of glazing. |
|
|
IMPORTANT: do not use 'off
the shelf' general decorating
rollers; these may not apply the
product at the correct consistency. |
|
 |
Removal: |
|
|
|
|
|
Paintshield can be removed by peeling.
will turn white when wet but it will
not come off unless peeled.
Paintshield water resistant when it is
dry film. |
|
 |
Safety & Handling: |
|
|
|
|
|
Avoid breathing vapors/mists that
occur during spraying – wear a
painter’s mask or other suitable
respiratory device when applying
this product. Avoid skin and eye
contact. Do not allow product to
freeze. Keep container closed when
not in use. Store in a clean dry
area with a minimum temperature of
50?F. |
|
 |
Flammability: |
|
|
|
Water Resistant Doorshield presents
no fire hazard as received, during,
or after application. Paintshield
2810
is non-flammable in liquid or dry
state. |
|
 |
Disposal: |
|
|
|
|
|
protective Peelable coating
Doorshield is disposed like paint
films ad other solid materials. |
|
 |
Packaging: |
|
|
|
Paintshield 2810 is available in
1gallon,5 gallon,55 gallon & 110
gal/220 gal disposable tote tanks.
Totes feature an inner bladder that
collapses as product is dispensed,
ensuring that all product is usable
over the life of the container in
service. |
|
|
Also available in different colors
for additional costs. |
|
 |
Operating Guidelines: |
|
|
|
1.When applying, use the same
protection as used while applying
paint. |
|
|
First Time Application: I. Cleaning
of equipment:
clean
immediately with water after use. |
|
|
|
 |
Testimonials:
"We
are looking for some type of
Industrial coating to protect
our rental equipment from paint
overspray and concrete. We need
to be able to remove this
coating for the next rental. Can
you help us?? Thanks!! " "We
used some of your Paintshield
2810, and the stuff works great!
It sprayed on cloudy, but when
it cured it was clear. It
surprised us all. I'll recommend
this stuff to any rental outfit
or painter." Ian M.Young ,
Premier Platforms Conyers, Ga.
USA |
|
|
|
|
