|
|
|
|
|
|
| |
Temporary protective Automotive Peelable masks for protecting automobile designed to combat the hazards that a vehicle faces on today's highways. Rock chips, insects, bad weather, and salted roadways are just some of the things that can damage the beautiful factory finish of a vehicle and diminish it's value. |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
 |
Main Advantages: |
|
|
| |
Offers cost-effective protection during storage, transport and fitting. A tough weather-resistant film, withstands hazards , scratching and solvents overspray. It removes cleanly without leaving residue. |
|
|
|
|
| |
Automotive strippable coatings : |
|
|
|
|
| |
|
Results in a reduction of labor costs. |
|
Once cured, it provides an extremely tough, uniform film thickness. |
|
Curing time can be cut considerably with the use heat lamps (100F), circulation of air and other factors. |
|
Easily removed...peels off in sheets which eliminates messy hand scrapping |
|
Safe...non flammable |
|
Suitable for all substrates including polycarbonates, plastic and painted surfaces |
|
|
|
|
|
|
|
|
| |
 |
Description: |
|
|
| |
General Chemical's Automotive strippable coatings dries to form a contour-hugging skin-tight protective film. Automotive customers and others recognized the value of protecting substrates during fabrication, assembly and shipment. The tough General Chemical's Peelable coating clear film is still the best method of preventing scratches and abrasions and strips cleanly away from the surface leaving no residue. It will also act as a maskant against paint overspray. |
|
|
|
|
| |
Who hasn't been bugged by the corrosive nature of insect fluids on car paint? If you're not in love with "love bugs" and their creepy-crawly kin, you're not alone. If you deplore the mess and believe there's something in insect insides that damages paint by softening the finish, you may be ready to tackle it with our Peelable coatings combating something that truly bugs us! |
|
|
|
|
| |
According to "bug doctor" Steven Kutcher of Arcadia, CA, bug splats are "insect blood, or hemolymph and internal fluids, that contain many compounds like sugars, proteins, salts, fats hormones and such." Even though they are in small quantities, "when insects hit at high speed this often gets baked on," he said.
Dave A. Carlson, research chemist for the U.S. Department of Agriculture, said the thick clouds of insects common in the spring and summer are a significant problem for vehicle and boat owners. Peelable coatings form General Chemical can help
|
|
|
|
|
| |
protects against damage from: |
|
|
|
|
| |
|
Branch Scratches |
|
Bug Splatters |
|
UV Damage / Fading |
|
Stone Chips |
|
Bird, Bat, Bug Droppings |
|
Pollution |
|
Dirt and Dust |
|
Tree Sap |
|
Grease & Grime |
|
|
|
|
|
|
|
|
|
|
|
|
Preservation System: |
|
|
|
|
| |
Our Peelable coatings are used for long term preservation for the external storage of vehicles and equipment saving the use of internal storage space and also when they are loaded on deck, protected from the corrosive elements during the long sea voyage . |
|
|
|
|
| |
Similar applications apply to any components that may be exposed to the elements for long periods of time that would be affected by U.V. degradation, acid rain or corrosion. The General Chemical Preservation System Peelable maskants are non toxic, non flammable and the water borne skin tight film will not damage plastic or painted surfaces. |
|
|
|
|
| |
Clay Modeling Concept Cars: |
|
|
|
|
| |
Stripcoat 4490AL is solvent based Bright Silver Peelable coating for prototypes in engineering design on clay models and other substrates so the flaws can be found easier. 4490AL is Automotive Peelable masks an international standard for designing prototypes such as cars during designing and manufacturing process |
|
|
|
|
| |
The General Chemical's temporary protective coatings are water borne non-toxic and non-hazardous products which is applied by lamb’s wool roller. It peels away cleanly leaving no residue and will not damage plastics or painted surfaces. |
|
|
|
|
| |
General Chemical strippable coating is also used to protect heavy traffic areas and sensitive surfaces against staining and abrasion during construction, storage and transport. Simply roll on and peel off on completion. The tough film is weather-resistant, UV and solvent resistant. |
|
|
|
|
| |
 |
Products |
|
|
|
Automotive Strippable Coatings Special Features |
|
|
Solvent Based Clay Modeling: For Prototypes, Strippable excellent water and acid resistant solvent based Peelable coating for applications like clay modeling, concept cars, prototypes. Low viscosity for air assisted spray and brushable.
Color: Aluminum
Application: AA
Substrates: M; TS; G |
|
Water Based Invisible Bra For Bumpers, Lenses, Lamps and skirts of transportation vehicle temporary protection against stone chips, bug damage, abrasion and weathering while allowing a vehicle's color brilliance to show through and its design intent to be maintained
Color: Clear
Application: AA; BR; R
Substrates: A; G; M; TS; P; W |
|
|
|
|
|
|
|
|
| |
 |
Application: |
|
|
| |
|
|
|
|
|
| |
Standard air assisted, or airless spray equipment, Brush or Roller (Use lambs wool roller). |
|
|
|
|
| |
Using standard good atomizing spray equipment (eg. DeVilbiss MBC gun, FF nozzle and No 765 air cap) with pressure feed, a 100 micron (0.004") film can be applied to a vertical surface in one coat. Atomization pressure of 5ATM (75lbs/sq in) and sufficient pot pressure (0.3 ATM - 5lbs/sq in) to obtain proper fluid delivery is recommended. Airless spray can also be used such as Graco No 205-904 with a 163-168 insert and a 28:1 ratio pump. Use water only for cleaning spray equipment. Drying can be accelerated by circulation of warm air or infra red lamps. |
|
|
|
|
| |
 |
Special Instructions: |
|
|
|
|
|
| |
When spraying over freshly lacquered or re-enameled surfaces, allow 24 for lacquer to dry and allow full enamel cure before applying peelable coatings. Be sure to apply full film thickness of 100 microns (0.004"). On equipment to be stored for many months exposed to rain, sun and snow, it is recommended that a 200 micron (0.008") film of Strippable coating be applied in two coats, drying one hour between coats. This is a water based compound and should be protected from freezing. Recommended storage temperature is 10oC-32oC. |
|
|
|
|
| |
Try to avoid 'feather edges' or areas where it is applied thinly. In order to achieve a defined edge it may help to apply masking tape, roller up to and over the tape and remove tape while Our Peelable coatings Peelable coating is still wet. |
|
|
|
|
| |
 |
Repair: |
|
|
| |
If the Our Peelable coating film rips or tears, the flap may be lifted and resealed by applying a fresh wet coat to the underside and resealing. Alternatively, cut away flap and re-apply fresh coating, it will bond to itself.
|
|
|
|
|
| |
 |
External Weather Resistance: |
|
|
| |
Long-term exposure to sunlight will cause premature deterioration and brittleness of the film. Exposure to water after the film is dried will soften the film but it will recover once it dries. Avoid traffic over the wet or while the film is wet. If components are to be stored externally for several weeks we recommend the application of acrylic topcoat which will protect for 12 months and more.
|
|
|
|
|
| |
 |
Drying Time: |
|
|
| |
It is critical that Our Peelable coating film is allowed to cure dry. Drying time will vary according to humidity, temperature and weather condition. The evaporation of water will be speeded by air movement and warmth supplied by natural and mechanical means. |
|
|
|
|
| |
 |
Adhesion: |
|
|
| |
Our Peelable coatings is a temporary protective Peelable coating and adhesion is low.
|
|
|
|
|
| |
 |
Process: |
|
|
| |
Our Peelable coatings once completely dry are resistant to water and solvent and acts as a mask against sprayed emulsion paints, lacquers, oil or grease and water.
|
|
|
|
|
| |
 |
Removal: |
|
|
| |
The dry Our Peelable coatings strippable coating film can be easily removed either by hand stripping or other means. Our Peelable coatings are thermoplastic. Do not try to remove in freezing conditions. Our Peelable coatings becomes brittle in freezing condition.
|
|
|
|
|
| |
 |
Clean Up: |
|
|
| |
Our Peelable coating is a water-based product and you can clean spray equipment and brushes with water. Do this immediately before peelalbe coating starts to dry.
|
|
|
|
|
| |
 |
Coverage: |
|
|
| |
One liter will cover approximately 4 square meters at a dry film thickness of 100 microns. You can also use following chart to calculate in mil thickness and gallon coverage.
|
|
|
|
|
| |
Approximate Square Feet Coverage Per Gallon of General Chemical's Peelable coatings:
|
|
|
|
|
| |
| Water Based coating's Wet films to Apply In Mills |
4.5 |
6 |
9 |
11 |
13 |
14 |
16 |
18 |
21 |
| Square feet of Coverage per Gallon |
401 |
267 |
194 |
155 |
129 |
111 |
97 |
86 |
75 |
| Dry Film Build Required In Mils |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
| Solvent based coating's wet films to apply |
6.6 |
10 |
13 |
|
|
|
|
|
|
| Square feet of Coverage/Gallon |
250 |
160 |
50 |
|
|
|
|
|
|
|
|
|
|
|
| |
General Chemical has a complete line of Peelable Masks to meet your challenging requirement. If we do not have something to meet your specific requirement, than we will develop it by working with you to meet that need for strippable coating. |
|
|
|
|
|
|
|
