General Chemical Corp.
12336 Emerson Dr.
Brighton
Michigan (MI.) 48116, USA USA: 866-623-5600 Overseas: 428-587-5600 Fax: 248-587-5606
Email : sales@strippablecoating.com
Introduction: Paintable Peelable Coating and Temporary protective
Liquid Masking For TV and Movie Studios.
Temporary
decoration of a studio floors and peelable paint
for makeover on vehicles, equipment and
buildings used in filming.
LiquiPeelMask strippable coating for Studio
Floors and Cyclorama Walls allows fast
turnaround for different decorative effects with
minimum amount of downtime.
Allows cost effective temporary advertising on
large structures, buildings, including walkways,
floors, roofs and vehicles. It can be used on
aircraft, motor vehicles and trains and can
transform large structural areas into an
advertising canvass for an event or product
launch.
The surface of a cyclorama wall is built up
drywall compound, finish troweled and sanded to
a smooth surface. It is then primed and painted
with a latex paint. This is the surface the
peelable coating would be applied to. All
direction changes are done by covering the wall
approaching the floor and side wall sections so
the entire area appears seamless.
The coating can then be painted colors, or with
various scenery. The blue screen and green
screen cyclorama walls are commonly used to
create special effects on camera
LiquiPeelMask
Peelable Mask is used to temporarily decorate
equipment, vehicles or buildings during a film
shoot. It can be use for blanking out road
markings, signs or add decorative effects or
graffiti to buildings.
It may be used as
a base onto which a number of different layers
of paint may be added for specific requirement. ,
LiquiPeelMask can be stripped away like a
'carpet' and the entire process can be
repeated. It is anti static, non toxic and
non flammable.
It is also
weather resistant and thus it can be used
outside for up to several months. Available in
all colors, messages can be applied by self
adhesive graphics or paint.
Floor strippable coating, Peelable coating for Floors and Temporary Protective Peelable coating for floor with Heavy traffic, Photographic studio.
When Cured: water Resistant, Alkali resistant and Heat Resistant
Designed especially for floors, It has built in traction to walk on it and avoid slippage. LiquiPeelMask films are tough and durable to handle heavy forklift and foot traffic. Perfect for floor areas around presses, spray areas, high traffic routes.
It is easy to apply and very easy to peel. Maintenance costs with
LiquiPeelMask are reduced and floors are maintained in brand new condition. .
LiquiPeelMask has no VOC's
Easily strippable
LiquiPeelMask allows easy maintenance for any Industrial Floors.
Booth Coat 5201 represents the ultimate in non-solvent strippable coatings. It is well stabilized against brittleness and it will not be softened or penetrated by solvent-based paints.
LiquiPeelMask can be used on concrete, tile, glass, ceramic, laminates, brick, and many other non-porous clean surfaces such as :
Concrete floors-painted or sealed
Tile Floors-with sealed grout
Wood floors-seal bare wood floors first to prevent pulling up wood fibers
Laminate flooring
Brick Floors-Apply sealant first
Steel, aluminum, brass, copper and other ferrous and non ferrous metals
Glass, plastic and acrylics like Lexan
Other non-porous or well sealed floor materials.
General Chemical's
LiquiPeelMask is a CLEAR water resistant, Peelable temporary protective coating which has many applications. It can be used to protect various types of surfaces during industrial processing.
LiquiPeelMask air dries quickly, leaving a tough, clear flexible coating that is easily removed from a variety of surfaces.
LiquiPeelMask represents the ultimate in waterborne removable coating technology. It is stabilized against brittleness and is not softened or penetrated by most water-based compounds.
LiquiPeelMask is good over cement, linoleum and floor painted with enamels that are resistant to water.
LiquiPeelMask will adhere to enamels based on emulsions and therefore should not be used.
1.Are any of your liquid peel able materials paintable? We have
a studio with floor, hard cyc and wall that need one large
contiguous sheet of a peelable material that can receive
multiple layers of latex paint.
It’s the system that was installed some 20 years ago, and it’s
time to replace it (peel it up and start over). The only issue
is that we don’t know what material to use as that base.
2. Greetings: I read your info. on your website, but have a few
other questions I would like to ask you.
I'm looking to cover two soundstage floors that are made of
concrete. The stages are in the process of being built, so the
floors will be brand spanky new!
The first stage is approx. 6,000 s.f., how much paint do you
suggest I will need to cover the area?The second stage is
approx., 2,000 s.f, again how much paint to cover it?Would I be
using the Liquid Peel mask for this application?Can you please
give me costs on the above spaces, including a shipping
estimate?The stages are located in Minneapolis, MN.
We also will have two cyclorama walls on the stages and from
what I have read these can be covered as well with Stripaway
5980, correct?I would also like you thoughts on how much it
would be to cover an L-shaped cyc that is 53' x 73' x 25' high
as well as a wall that is 28' w x 25' high?Price on this as
well, please?Is there a price break when we purchase in such
large amounts?
Once the coatings are down and dried, they turn clear, correct?
Does it matter how many coats of paint I have over it before I
need to peel it up and lay down a fresh coat? If an area started
to come up, which is the best way to "mend" the area?
Our Recommendations : 150 square feet per gallon. 6000
ft/2 will need 40 gallons; 2000 ft/2 will need 15 gallons – a
total of 55 gallons.
Cyclorama walls-----what is the substrate, is it painted than
what kind of paint, etc. We need to know on what surface the
peelable coating will be put.
Products
Paintable Peelable Coating and
Temporary protective Liquid Masking For TV and Movie
Studios
LiquiPeelMask
Paintable
Peelable Mask, Floor strippable coating, Peelable coating for Floors and Temporary Protective Peelable coating for floor with Heavy traffic, Photographic studio.
LiquiPeelMask should be used as received. It can be applied by airless spray, paint roller, or brush. The coating dries upon water evaporation. Wet coating is milky (white). Dry coating is clear. The surface to be applied with
LiquiPeelMask should be dry, clean and free from oil, grease and other water incompatible matter. The clean surface helps even distribution of
LiquiPeelMask. The surface remains clean when LiquiPeelMask is removed and surface clean up will not be necessary for second time application.
LiquiPeelMask should be applied to form a dry film in the range of 3 to 10 mils(.003" to .010") thick. Application temperature is ambient to no lower than 50ºF. Drying times will be affected by humidity, film thickness, air movement and temperature. Best time to apply is on week-ends or late afternoons to give a coating time to dry. Proper fan placement can speed the dry by removing water at a much faster rate. Application by roller might require a few coats. Thick coating peels in one large continuous sheet. Thin coatings will break in areas of coating weakness.
LiquiPeelMask is water based for safe use and easy water clean up. Dry coatings are water resistant. When applying
LiquiPeelMask use the same protection as used while applying paint..
Precautions:
Always test a small inconspicuous area first. Because of various substrate characteristics and conditions like porosity, deterioration, embattlement, adverse wear area, type of ink, paint and or other coatings applied, abrasion of panted surfaces, and the like ,it is difficult to predetermine specific effects from this product.
Safety & Handling :
See application and safety precautions before applying. Liquid product is slippery when wet. Please refer to MSDS.
Recommendations :
1.Outline your floor area to be protected with the self adhesive fiber tape. DO not overlap tap edges ,but keep adjacent.
2.For best results, wet roller with water and squeeze out excess water. For best overall results Floorpeel should be applied to a minimum of dry mils
3.Apply LiquiPeelMask and let it dry. Rinse out roller with plenty of water between coats
4.Allow first coat to dry. dry time will be affected by coating thickness, application methods, humidity and air flow in the vicinity. Initial drying time is 30 minutes approximately.
5.Apply second coat and allow it to dry before permitting traffic on the floor.
Curing:
LiquiPeelMask cures upon water evaporation. Dry time is dependent upon temperature, humidity, air movement and thickness of the coating. Curing may be accelerated by forced dry air up to 100 degrees Fahrenheit. Force dry coatings can cure in less than 10 minutes. Most coatings without assist will dry in a few hours. It is imperative that
LiquiPeelMask be thoroughly cured and dry, before an attempt is made to peel the coating from the substrate. Cured coating is clear throughout. Cured
LiquiPeelMask is water resistant. Floors coated with
LiquiPeelMask can be water mopped.
Storage:
LiquiPeelMask should be stored in the original shipping container with temperatures between 60 and 90 degrees F. Container should be sealed until needed. Protection from freezing is necessary.
Removal:
LiquiPeelMask is readily removed from surfaces by peeling any exposed edge. This Peelable coating can be removed by prying an edge and slowly lifting the coating off the floor.
Physical Characteristics:
Color: White when wet. Clear when dry. Weight: 9.92 Lbs./Gallon Viscosity: 50-60" on Zahn #2 cup at 77 degrees Fahrenheit Flashpoint: None
Operating Guidelines:
1.When applying, use the same protection as used while applying paint. Provide
ventilation.
2.Chemical goggles, impervious gloves and respirators should be worn when handling
LiquiPeelMask.
3.The use of non-sparking equipment is advised if scraping becomes necessary.
Some Equipment Notes:
Airless System: Recommended tip size is .070, similar to a glue tip.
Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification.
