|
 |
|
|
Marbleshield 4580 |
|
|
|
|
|
Temporary Protective Water Resistant Peelable Coating, Protects: Metals, Glass, Acrylics. Enamels And Other Surfaces. Water reducible. VOC Free. Water Resistant Peelable coating for various applications to temporarily protect surface from exterior and interior environment , prevent damage and scratches including glass, good sag resistance spray through Air Assisted conventional spray equipment . Low temperature curing and low viscosity |
|
|
 |
Customer Comments : |
|
|
| |
Water based paint spray clear strippable coating for walls, ceilings, floors, windows and light fixtures: one coating to do it all.
1. I did
purchase the liquid masking coating
for marble and stone surfaces. It’s
an unusual application I am sure, but
we installed a new kitchen backsplash
with a green/white marble tile and the
grout color is a dark green. When
testing grout on tile samples I had
problems with the marble absorbing the
grout into surface of the tile and
turning the white marble dark and
greenish muddy looking. It was not
good. Reading up on tiling I found
that natural stones and marbles will
absorb grout unless you seal the
surface. I tried various tile sealers
sold for this purpose and none of them
worked well and the tile always ended
up dark and blotchy. So, in
desperation, I started looking outside
the box of traditional tiling methods
and was looking for something that I
could coat the face of the tile with,
grout and then remove again. I came
across your liquid masking coatings
through an internet search.
To
wrap up a long story, the coating
works tremendously well. It went on
easy with a simple paint roller (a
small detail roller with a short nap)
and does a great job at minimizing the
absorption of the grout. I was very
pleased with the results of all of my
sample pieces. I did find that I
needed to use multiple, thin coats,
about 2-3 coats, for the best results,
but the can of coating I purchased
goes a long way so I have more than
enough. The coating peels off really
easily and actually reduces the effort
to wash the grout haze off the tile,
as the haze is on the coating, not the
tile. The final backsplash grouting
is going to take place sometime over
the next two weeks, but I am confident
I have found a perfect solution to the
problem. Great product! Thanks so
much. Brenda
2.
I bought a gal of Marble Shield 4580
last summer. It is working well for
the project I am involved with. I
need to know a couple of
things however.
1) Is it freeze thaw stable?2)
What square foot coverage could
I expect to get out of a gal. if I
roll it on.
Thank You , Joe
Our Recommendations: Joe,
Marbleshield 4580 is water based
peelable coating with Zero VOC,
therefore, it is prone to freeze and
it is not freeze thaw stable. This
product, when cured, is water
resistant and is washable. The
product does absorb water on prolong
exposures and can turn slightly
milky. This product is completely
clear in the absence of water.
2. We would
like some information, and samples, of
this material. We are a construction
company building high-end custom homes
and we need to find some kind of
material to protect the wood and
stone/tile flooring while construction
is still in progress.
1.
Does this material work for this
installation especially over very
expensive material?
2.
I see many types of material available
on your website and would like to know
which material is the best for this
application.
3.
How much square footage does a gallon
cover?
4.
We are located in San Diego, what is
the shipping time to receive your
material?
Recommendation:
Marbleshield 4580 is a water based
peelable coating which cures upon
water evaporation to a clear water
resistant hard film. The cured films
can be applied to concrete, marble,
sealed wood and most other surfaces
that are non porous. The viscosity of
this material is high and that helps
the film to bridge over minute cracks.
The coating can be peeled by prying a
corner and lifting the paint off. A
gallon of Marbleshield will cover 160
to 190 square feet. Application by
airless spray is best but it can also
be applied with paint rollers. |
|
| |
 |
|
|
|
|
|
|
|
| |
 |
Main Advantages:
Temporary Protective Peelable
Coating For Marble Protection,
Liquid Masking For Stone
Protection |
|
|
|
|
|
| |
|
Safe to use |
|
Water Clear -- No Dyes or Pigments |
|
Water resistant when dry |
|
Water cleanable when wet |
|
Peels from variety of surfaces |
|
|
|
|
|
|
|
|
|
|
|
| |
 |
Application: |
|
|
|
|
|
| |
Marbleshield 4580 is normally used as received. It can be applied by spray, roll or brush . Marbleshield 4580 may also be diluted at the rate of one to four ounces of water per gallon or as needed for proper application. The sprayed coating dries, depending on the film thickness, in 30 minutes to 4 hours. Marbleshield 4580 should be applied to yield a dry film from one to ten mils (.001" to .010") thick. The coating, when totally dry, is resistant to water and some solvents used in paint. Application temperatures range from 120º F. for fast force cure to no lower than 45º F. Marbleshield 4580 cures upon water evaporation. Faster cure can be realized by placement of air fans to remove the water from the coating. The coating when applied is milky but when cured is totally transparent. The milky appearance is indicative of water presence in the coating. Brushes, rollers and spray equipment can be cleaned with water immediately after coating application. The coating becomes water resistant when clear . |
|
|
|
|
| |
Customer Questions :kindly provide the Proforma for the white pigment version. |
|
|
|
|
| |
Would really appreciate if you could advise: |
|
|
|
|
| |
a) can the Marbleshield surface we gently washed without being stripped off? |
|
|
|
|
| |
b) Approximate expected “life-length”? |
|
|
|
|
| |
Also, please do advise if you are interested in having an agent in Singapore. Looks like you have some very unique products which will definitely have a good market here. Sincerely, |
|
|
|
|
| |
Answer :MARBLESHIELD has good adhesion to the substrate and it can be washed. This product can be peeled only if the paint is pried and then slowly lifted |
|
|
|
|
|
|
|
|
|
|
| |
 |
Removal: |
|
|
|
|
|
| |
Marbleshield 4580 is removed by peeling. Simply, pry a piece of coating in one corner and lift. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Flammability: |
|
|
|
|
|
| |
Water Resistant Marbleshield 4580 presents no fire hazard as received, during, or after application. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Disposal: |
|
|
|
|
|
| |
Marbleshield 4580 is formulated to exclude ingredients that are deleterious to the painting process, such as silicones, or to the water wash system, such as foam generating or foam stabilizing ingredients. |
|
|
|
|
|
|
|
|
|
|
| |
 |
Operating Guidelines: |
|
|
|
|
|
| |
|
When applying, use the same protection as used while applying paint. The ventilation stem should be operating while the material is being sprayed. |
|
|
|
|
|
|
|
|
|
 |
First Time Application: |
|
|
|
|
|
| |
I. Cleaning of Equipment: |
|
|
|
|
| |
To clean pressure pot, airless equipment, spray guns, spray lines |
|
|
|
|
| |
|
Flush equipment and lines with the current paint thinner (toluene, xylene, or mek), |
|
Follow with a water reducible solvent, such as butyl cellosolve. This will help to remove any solvent residue. |
|
Thoroughly rinse with water. Making sure that all solvent and paint residues are removed. |
|
|
|
|
|
| |
II. Cleaning |
|
|
|
|
| |
To clean all surfaces where Marbleshield 4580 is to be applied: |
|
|
|
|
| |
|
Clean surface with butyl-cellosolve type cleaner. |
|
Remove all previous peelable coatings, oils, dirt, and solvent residue from the surface. |
|
NOTE: You do not have to do this cleaning step to have Marbleshield 4580 peel or rinse off the surfaces. This procedure can be eliminated after the second and all subsequent applications. |
|
Marbleshield 4580 can now be applied. |
|
|
|
|
|
|
|
|
|
|
|
|
 |
Some Equipment Notes: |
|
|
|
|
|
| |
Air assisted spray equipment is recommended for proper film uniformity. |
|
|
|
|
| |
Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification. |
|
|
Temporary Protective Peelable
Coating For Marble Protection,
Liquid Masking For Stone Protection,
Liquid Marble Protection Film |
|
|
|
|
|
|
|
