General Chemical Corp.
12336 Emerson Dr.
Brighton
Michigan (MI.) 48116, USA USA: 866-623-5600 Overseas: 248-587-5600 Fax: 248-587-5606
Email : sales@strippablecoating.com
Bath Tub Liquid Masking Protective Film, Bath Tub Strippable
Coating , Sanitary Fixtures
Protection Film
According to industry data, 70% of tubs are
damaged during construction and require
repair before the home can be sold.
Our tub protection peelable
coatings protects tubs,
whirlpools and shower stalls against
scratches, abrasions and job site dirt and
grime. Easy-to-apply, the water-based
coating cures to a durable, easy-to-remove
"protective skin." One gallon covers
approximately two standard 5' tubs.
Use for protecting Showers, Bathtubs,
Laminates, Polished stone and Non-Porous
surfaces. Protects against scratches, nicks,
paint overspray, miscellaneous damage,
provides reliable protection during the
construction process. Peels off easily when
the surface is no longer subjected to
construction damage
If you have ever walked a construction job, you have seen the tub used as a
trash can and the staining and scratching that results from this practice.
Naturally, the homeowner will focus on this and carefully examine the tub for
damage to add to the punch list.
Description:
TubCoat is applied
shortly after the tub is installed. Once the
home is built and the final cleanup is
scheduled, the protective coating is peeled
away in one piece to form a bag enclosing
all trash and debris, revealing a tub in
showroom condition! TubCoat virtually
abolishes tub repairs and reduces cleanup
costs. Also, since all paint overspray is on
the TubCoat coating, you eliminate the
use of harsh flammable solvents to remove
the overspray. Many of these solvents can
dull and weaken fiberglass or acrylic
surfaces.
General Chemical Corp.?s protective
Peelable coating TubCoat is a
strippable coating engineered for use on a
bathtub and wide variety of surfaces.
Typical applications include where a
temporary protective coating is desired to
protect the surface form damage, scratches
,chipping and form exterior and interior
environment. Depending on the thickness of
the wet film; dry film thickness can range
from one to ten mils. Thin films are clear
while thicker films are translucent. The
application of TubCoat coatings will
protect surfaces from paint overspray or
damage during manufacturing and shipping.
TubCoat represents the ultimate in
non-solvent, water borne, strippable
coatings. TubCoat does not contain
VOCs.
Bath Tub Surfaces and Sanitary Fixtures
Protection:
Bath
tubs, Spa baths ,Shower Trays, Other
sanitary fixtures
Enamel,
Acrylic, Gel-coated fiber glass,
Vitreous china
Protects From damage caused by during
construction and Installation:
Foot
traffic, Tools, tool boxes, Grinding
sparks
Removal
of rubbish debris, Removal of dried
liquids, General building debris
TubCoat: Bath Tub Liquid Masking,
Bath Tub Strippable Coating ,Bath
Tub and Sanitary Fixtures Protection
Products
Bath Tub Liquid Masking, Bath Tub
Strippable Coating ,Bath Tub and
Sanitary Fixtures Protection
TubCoat 2630 Soft acrylic Tubs,
contractors and for residential and
commercial installations. Protective
Peelable Coating For Shower Stalls,
Whirl Pools and Bath Tubs
Bathtub Manufacturers: UV curable
temporary protective tub coating
that is liquid and is sprayed at
tub manufacturer's plant, dries to a
protective coating. It is peelable
or strippable by hand, UV resistant,
VOC-free, chemical resistant and water
resistant.
Customer Comments:
"Virtually eliminates tub repairs and
reduces clean up costs. This protective
peelable coating is removed in one piece
like a big garbage bag enclosing all trash
and debris revealing a fixture in showroom
condition! The total cost adds less than $30
of coating to an average $175,000 home!"
"TubCoat_-water based peelable coating that
is sprayed onto the shower stall, whirl pool
and Bath Tub. It dries to form a durable
temporary protective peelable coating that
protects the Shower stall, whirl pool and
Bath Tub from damage during the construction
phase."
Benefits To You:
Cost effective solution for Bathtub
and Shower fixture damage
Virtually
eliminates tub and shower repairs caused
during construction
Provides
Temporary protection through final
inspection
Performance Tests:
Bath Tub Liquid Masking
Protective Film, Bath Tub Strippable
Coating ,Bath Tub and Sanitary Fixtures
Protection Film
For Bathtub Manufacturers
1. Place 3 - 5lb Olympic style barbell
weights in the tub. (90 degree outside edge
- not rounded) Rigidly mount the tub on a
random vibration table. Conduct a resonance
vibration test using ASTM D 999 Method C in
frequency range of 5-300Hz (See Section
9.3.2 for octaves per minute). Passing is 1
hour with no observed damage. Test to
simulate shipping damage from plumbing
fittings being placed in the tub prior to
shipment to job site.
2. Must stop a 6" drywall knife when dropped
on the blade's corner from 8 feet above the
tub bottom. Test is to simulate the clumsy
dry-waller.
3. Place a 1 1/4" drywall screw on the tub
bottom. Perform ANSI Z124.1 section 4.4
(approximately) directly on top of the
screw, Under full load turn the fixture 3
times. There should be no damage from the
screw. Test to simulate clumsy dry-waller.
Application is easy to
brush on. Brushes can be
cleaned with soap and
water.
TubCoat is normally
used as received, it can
be applied by air or
airless spray, roll
coating, or brushing.
Typically it is sprayed
on the fixture using an
airless sprayer .Apply
product evenly to
produce a dry film
thickness of
approximately 7-10 mils
or wet film thickness of
14 to 20 mils.. Drying
time is dependent on
temperature. At 70?F,
product will dry in
approximately 24 hours.
You can enhance drying
time by air movement and
other suitable means.
Before applying TubCoat_,
carefully examine the
fixture for any
pre-existing damage. If
damaged, contact the
builder or owner before
proceeding with
installation of the
coating. Do not apply to
porous surfaces. Do not
apply if temperature is
below 45?F.
TubCoat may also be
diluted at the rate of
one to four ounces of
water per quart. The
sprayed coating dries,
depending on the film
thickness, in 30 minutes
to 4 hours. TubCoat
is applied to yielding a
dry film from one to ten
mils (.001" to .010")
thick. The coating is
resistant to attack by
solvents used in paint.
Application temperatures
range from 120? F. to no
lower than 45? F.
I used your TubCoat
and now when I'm removing
it, it's bringing pieces
of the tub with it and
only removes in small
pieces at a time. Is there
a safer more efficient way
to do this, while
protecting the tub?
TubCoat if applied
at 10 mils wet (5 mils dry
film) can be removed by
prying the film and slowly
removing by peeling. The
fact that this film breaks
for you on removal is
ether it is not cured,
should be transparent blue
film, or applied way too
thin. If too thin than
fill the tub with warm
water and let it stand
until the film starts to
turn whitish. Wet soaking
towels placed on the film
can also be used. When the
film turns light blue
drain the water and use a
damp towel to roll the
thin film off.
Removal:
TubCoat 1600 can be
removed by peeling.
Safety & Handling:
Avoid breathing
vapors/mists that occur
during spraying ? wear a
painter?s mask or other
suitable respiratory
device when applying
this product. Avoid skin
and eye contact. Do not
allow product to freeze.
Keep container closed
when not in use. Store
in a clean dry area with
a minimum temperature of
50?F.
Flammability:
Water Resistant TubCoat
presents no fire hazard
as received, during, or
after application.
TubCoat_ is
non-flammable in liquid
or dry state.
Disposal:
Protective peelable
coating TubCoat is
formulated to exclude
ingredients that are
deleterious to the
painting process, such
as silicones, or to the
water wash system, such
as foam generating or
foam stabilizing
ingredients.
Packaging:
TubCoat_1600 is
available in 1gallon,5
gallon,55 gallon & 110
gal/220 gal disposable
tote tanks. Totes
feature an inner bladder
that collapses as
product is dispensed,
ensuring that all
product is usable over
the life of the
container in service.
Also available in
different colors for
additional costs.
Operating
Guidelines:
When applying, use
the same protection
as used while
applying paint. The
booth ventilation
stem should be
operating while the
material is being
sprayed.
Chemical goggles and
impervious gloves
should be worn when
handling TubCoat .
Use of non-sparking
metal equipment is
advised when
scraping to remove
booth coatings, to
avoid fire hazards
from the accumulated
paint.
Testimonials: Bath Tub Liquid
Masking, Bath Tub
Strippable Coating ,Bath
Tub and Sanitary Fixtures
Protection
"Before we started using TubCoat_ we
had (problems with) scratches, rust
stains, discoloration and repairs.
With TubCoat_ our
problems? disappeared. It is a great
product."
"?As an experiment, I coated a highly
polished cistern cover with your
TubCoat_. The cover was exposed to
the tropical sun, tropical rains and
the abuse of stucco installers,
masons and painters. After 12
months, I peeled the "protective
skin" off (the cover)?it looked as
good as the day it was installed. I
was truly impressed? now I know the
tubs and showers we protect (with
TubCoat_) are perfect."
"I was searching for a product that
would save me money and I found it
with your 'TubCoat_'. I am a general
contractor and we build multifamily
developments in North Carolina and
we install quite a lot of fiberglass
tub/shower units. During
construction these fiberglass units
were getting cut, nicked, and abused
and I couldn't find anything to
protect the finish surface and would
end up paying hundreds of dollars
per unit to have touch up fiberglass
work done. The above mentioned
product was brushed on an left to
cure and weeks later when it was
peeled off we saw a reduction in the
amount of touch up needed by at
least 98%. Thanks for the help!"
Jack Sharp Jr. The Worthington Co.,
LLC
Temporary Protective Peelable
coating, Water Resistant Strippable
Coating For Shower
Stall, Whirl Pool, Bath Tub, Tub
coat To Protect Tub
:
Approximate Square Feet Coverage Per
Gallon of General Chemical's
Peelable coatings:
Water Based coating's
Wet films to Apply In
Mils
4.5
6
9
11
13
14
16
18
21
Square
feet of Coverage per
Gallon
401
267
194
155
129
111
97
86
75
Dry Film
Build Required In Mils
2
3
4
5
6
7
8
9
10
Solvent
based coating's wet
films to apply
6.6
10
13
Square
feet of Coverage/Gallon
250
160
50
Bath Tub Liquid Masking Protective
Film, Bath Tub Strippable Coating
,Bath Tub and Sanitary Fixtures
Protection Film
Description:
