General Chemical Corp.
12336 Emerson Dr.
Brighton
Michigan (MI.) 48116, USA USA: 866-623-5600 Overseas: 248-587-5600 Fax: 248-587-5606
Email : sales@strippablecoating.com
You Are Here:Index>Automotive Protective Peelable Coatings ,Auto
Body Paint Shop Overspray Masking , Automotive
collision shop Painter Liquid Masking Tape
Auto body Shop Paint Spray Booth Peelable Coatings:
Developed
for application to walls and floors of paint
spray booths and surrounding area. The peelable
masking film protects the walls and floors of
the spray booth area from paint overspray and
yet maintains its integrity by not allowing
solvent penetration. It can be quickly peeled
from any surface, even when heavily laden with
overspray.
General Chemical's water
based fast drying Peelable / Paint spray booth
strippable coatings are temporary protective
strippable coatings for Spray booths, Paint
Booths, industrial floors & various surfaces
such as paint booths spray booths, glass, decal,
storage parts wood and others to protect it
temporarily during industrial process or in
material handling.
Our Peelable coatings are used for long term preservation for the external storage of vehicles and equipment saving the use of internal storage space and also when they are loaded on deck, protected from the corrosive elements during the long sea voyage .
Similar applications apply to any components that may be exposed to the elements for long periods of time that would be affected by U.V. degradation, acid rain or corrosion. The General Chemical Preservation System Peelable maskants are non toxic, non flammable and the water borne skin tight film will not damage plastic or painted surfaces.
Water Based Viscous Peelable coating for walls, ceilings, floors, windows and light fixtures: one coating to do it all When cured: resistant to water, alkali and heat.
Color: Clear
It is critical that Our Peelable coating film is allowed to cure dry. Drying time will vary according to humidity, temperature and weather condition. The evaporation of water will be speeded by air movement and warmth supplied by natural and mechanical means.
Adhesion:
Our Peelable coatings is a temporary protective Peelable coating and adhesion is low.
Process:
Our Peelable coatings once completely dry are resistant to water and solvent and acts as a mask against sprayed emulsion paints, lacquers, oil or grease and water.
Removal:
The dry Our Peelable coatings strippable coating film can be easily removed either by hand stripping or other means. Our Peelable coatings are thermoplastic. Do not try to remove in freezing conditions. Our Peelable coatings becomes brittle in freezing condition.
Clean Up:
Our Peelable coating is a water-based product and you can clean spray equipment and brushes with water. Do this immediately before
peelable coating starts to dry.
Coverage:
One liter will cover approximately 4 square meters at a dry film thickness of 100 microns. You can also use following chart to calculate in mil thickness and gallon coverage.
Approximate Square Feet Coverage Per Gallon of General Chemical's Peelable coatings:
Water Based coating's Wet films to Apply In Mils
4.5
6
9
11
13
14
16
18
21
Square feet of Coverage per Gallon
401
267
194
155
129
111
97
86
75
Dry Film Build Required In Mils
2
3
4
5
6
7
8
9
10
Solvent based coating's wet films to apply
6.6
10
13
Square feet of Coverage/Gallon
250
160
50
General Chemical has a complete line of Peelable Masks to meet your challenging requirement. If we do not have something to meet your specific requirement, than we will develop it by working with you to meet that need for strippable coating.
Auto body Shop Paint Spray Booth Peelable Coatings: 
