Liquid Mask, Peelable Coatings, Strippable Coatings Temporary Protective Coatings
Liquid Mask, Peelable Coatings, Strippable Coatings Temporary Protective Coatings Liquid Mask, Peelable Coatings, Strippable Coatings Temporary Protective Coatings Liquid Mask, Peelable Coatings, Strippable Coatings Temporary Protective Coatings Liquid Mask, Peelable Coatings, Strippable Coatings Temporary Protective Coatings Liquid Mask, Peelable Coatings, Strippable Coatings Temporary Protective Coatings Liquid Mask, Peelable Coatings, Strippable Coatings Temporary Protective Coatings
 
Aircraft Protective Film
  Automotive Masking
  Auto Body Paint Shops
  Bath Tub Protection Coating
  Construction Protective Film
  Decontamination Products
  Decorative Film
  Equipment Protection Masking
  Floor Protection Film
  Furniture Protection Film
  Glow PeelMask
  High Temperature Coatings
  Industrial Coatings
  Laser Protection Masking
  Metal Protection Coatings
  Optical Media
  Paint Booths
  Plastic Thermoforming Masking
  Plating Anodizing Masking
  RC Scale Model Masking
  Stone Protection Film
Shipping & Storage Protection
  Scanning Bar Codes
  Sign Making
  Screen Printing
  Stadium Dressing
  Ship Building Protection
TV & Movie Studio Masking
UV Curable Maskants
Wood Protection Film
Window Protection Film
General Chemical Corp.
12336 Emerson Dr. Brighton
Michigan (MI.) 48116, USA
USA: 866-623-5600
Overseas: 248-587-5600
Fax: 248-587-5606
Email :
Liquid Mask, Peelable Coatings, Strippable Coatings Temporary Protective Coatings
Liquid Mask, Peelable Coatings, Strippable Coatings Temporary Protective Coatings
 
  You are Here: Index > UV_MetalMask > UV_MetalMask_732  
 
paint removers,paint strippers,Paint Stripping,Paint Removal,chemical strippers,paint strippers for aluminum,aluminum paint removers,Epoxy Paint Stripper
 

Temporary Peelable Masking Resin for Plastic Surface Protection

Applications Recommended Surfaces
 Performance Highlights
Acid stripping Steel UV Light Curing
Plating Stainless Steel Burn off grade, resists HCl
Grit Blasting Aluminum Excellent abrasion resistance   
Part Handling Nickel Alloys

Outstanding higher adhesion and tensile strength


 
Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds Introduction:
 
 

UV_MetalMask_733 is a UV curable, translucent, higher adhesion, tough film that is a burn off  grade for metal surfaces.

UV_MetalMask is an economical one component, UV cure masking resin that simplifies your process by offering fast, reliable protection for your parts. No measuring or special mixing required. It eliminates the need for fixtures, tapes, lacquers and wax in your metal finishing process and with the proper UV cure (irradiance), 733 will not leave a residue on the surface.

 
 

Uncured Typical Resin Properties

Property Value Test Method
Solvent Content Zero nonreactive solvents N/A
Chemical Class Aliphatic diacrylate mixture N/A
Appearance Translucent Gel N/A
Density, g/cm3 1.13 ASTM D1875
Viscosity, cps @ 20rpm 9-10,000 nominal ASTM 2556
Soluble in Organic Solvents N/A

 
  Typical cured properties

Property Value
Tensile strength, psi 6500
Elongation at break, % 43
Young’s modulus, psi 35

 
  UV cured 6 mil thick film  
 

UV Cure Guidelines

  
 

Light source: 400-600 W/in. mercury medium pressure arc or microwave lamp
Distance: focused light source with reflector for reduced part temperature
Total Energy Density (cm2): .9 W/cm2    (.68 J/cm2) * UVA
Belt speed: 20 ft./min.

  
  UV cure rate is dependent on many variables, such as; coating thickness, lamp irradiance, distance from the light source and line speed. It is recommended that a radiometer be used to monitor irradiance.  
  Measured with an EIT UV Power Puck radiometer

Depth of Cure

UV_MetalMask 733 has superior depth of cure for a UV cure coating. Most UV_Mask formulations typically cure to a depth of  .6 to 1.3 cm ( ¼” to ½”).
  
  Storage and Handling

Surfaces to be masked should be clean and free of contaminants.

Avoid exposing the product to high temperatures and minimize exposure to artificial or natural light prior to curing. Cool the cured parts to room temperature before testing.


 
 
  Terms & Conditions | Privacy Policy | Links | Warranty | Sitemap | PRESS RELEASE | FAQ'S | DISTRIBUTOR OPPORTUNITY | PRIVATE LABEL  
  COPYRIGHTS @ 2010 STRIPPABLE COATINGS . ALL RIGHTS RESERVED