General Chemical Corp.
12336 Emerson Dr.
Brighton
Michigan (MI.) 48116, USA USA: 866-623-5600 Overseas: 248-587-5600 Fax: 248-587-5606
Email : sales@strippablecoating.com
Anodizing Liquid Masking , Plating Liquid
Masking
You are Here:Index>
Anodizing Liquid Masking , Plating Liquid
Masking
Dip or brush Peelable coating Masking stop-off formulated specifically for electroless nickel, hard coat anodizing and chemical milling:
PlateOff_Mask4210 is solvent based MASKANT
Polymeric Vinyl peelable Coatings provide
protection in two ways; by forming tough,
flexible films with extremely low , they
stop substrate corrosion caused by
electolytic action or the presence of
water-borne oxygen. In addition, the
usually thick film provides physical
peotection against surface damage,
abrasion or moveenad hve proven that they
provide a high degree of protection
against acid and alkali atack.. 4210 is
very easy way to apply strippable coating
for the protection of substrates from
scratching and marring.4210 is useful for
substrate protection during polishing,
handling and long term storage. 4210 is
impregnated with transparent blue dye for
easy visual inspection as well as
identification and is non-staining and
stable to 100 degrees Celsius.
It is a liquid chemical maskant used as a stop off for anodizing, chromate conversion coating and other plating on metals. Mask-It is fast drying (usually an hour at room temperature) and is resistant to most chemical processes normally required to anodize or electroplate.
It is completely resistant to hot solutions up to 210°F and is tinted blue for better scribe line visibility. The cured film is tack free and will not adhere to itself or other parts.
Our Highest viscosity Solvent Based strippable coating engineered for high film deposit; excellent water and acid resistant to 200F. Color: Clear, can be tinted Application :Brush and Dip only. Substrates: M; TS; G
Coscoat 4300 : Color: Blue
Dip or brush Peelable coating Masking stop-off formulated specifically for electroless nickel, hard coat anodizing and chemical milling.. Color:
Blue Application :Brush and Dip only. Substrates: M; TS; G
Once cured, it provides an extremely tough, uniform film thickness.
Curing time can be cut considerably with the use heat lamps (100F), circulation of air and other factors.
Easily removed...peels off in sheets which eliminates messy hand scrapping
Safe...non flammable
Suitable for all plastic and painted surfaces
General Chemical has a complete line of Peelable Masks to meet your your challenging requirement. If we do not have something to meet your specific requirement, than we will develop it by working with you to meet that need for strippable coating.
Introduction
: Anodizing Liquid Masking ,
Plating Liquid Masking
