|
|
|
|
|
|
| |
Temporary protective Peelable masks
are used to protect metal parts from
corrosion or damage during handling,
shipping, and storage. Parts are
brushed or sprayed on with ShipCoat.
When dried , the resilient,
air-tight, strippable coating
protects the parts until they are
needed. |
|
|
|
|
| |
Parts need to combat the hazards
during shipping, storage or while in
transit that they face. |
|
|
|
|
|
|
|
|
|
|
| |
  |
|
|
|
|
|
|
|
| |
 |
Main Advantages: |
|
|
| |
Offers cost-effective protection
during storage, transport and
fitting. A tough weather-resistant
film, withstands hazards ,
scratching and solvents overspray.
It removes cleanly without leaving
residue. |
|
|
|
|
| |
For Storage & Shipping strippable
coatings : |
|
|
|
|
| |
|
Results in a reduction of
labor costs. |
|
Once
cured, it provides an extremely
tough, uniform film thickness. |
|
Curing time can be cut
considerably with the use heat
lamps (100F), circulation of air
and other factors. |
|
Easily removed...peels off in
sheets which eliminates messy
hand scrapping |
|
Safe...non flammable |
|
Suitable for all substrates
including polycarbonates,
plastic and painted surfaces |
|
|
|
|
|
|
|
|
| |
 |
Description:
Temporary Protective Peelable
Coating and Maskant For
Protecting Parts During
Shipping, Storage And In Transit |
|
|
| |
Multi-metal protection :
A full range of metal protecting
peelable coatings are available
to protect ferrous and
non-ferrous metals, including
peelable coatings that protect
combinations of metals for
Short-term and long-term
protection.
We have
solution whether you need
temporary protection during
in-plant processing, medium-term
protection for shipment and
storage, or extended protection
for lay-up, mothballing, and
field service. For a variety of
environmental conditions. Now
you can effectively protect your
metals and products against
humidity and aggressive
atmospheres as well as against
corrosive industrial, marine,
and tropical atmospheres.
Protected parts are immediately
ready for use when the peelable
coating is removed. l. No
degreasing, scraping, cleaning,
or further preparation is
necessary before processing,
installation, or use. Your
protected components, parts, and
finished assemblies are always
ready for immediate use.
Does not alter most material
properties. does not alter
important surface properties.
Our technology protects
any size products, components
during process, or stored parts
in a small box, to large
containerized shipments. |
|
|
|
|
| |
-
Multifunctional products.
More effective protection.
-
Efficient delivery systems that
make it economical to treat
hard-to-protect items.
-
Easy application.
Improved health, safety, and
pollution control.
-
Elimination of extra processing
steps in most cases.
|
|
|
|
|
|
|
|
|
Preservation System : |
|
|
|
|
| |
Our Peelable coatings are used for
long term preservation for the
external storage of vehicles and
equipment saving the use of internal
storage space and also when they are
loaded on deck, protected from the
corrosive elements during the long
sea voyage . |
|
|
|
|
| |
Similar applications apply to any
components that may be exposed to
the elements for long periods of
time that would be affected by U.V.
degradation, acid rain or corrosion.
The General Chemical Preservation
System Peelable maskants are non
toxic, non flammable and the water
borne skin tight film will not
damage plastic or painted surfaces. |
|
|
|
|
| |
The General Chemical's temporary
protective coatings are water borne
non-toxic and non-hazardous products
which is applied by lamb’s wool
roller. It peels away cleanly
leaving no residue and will not
damage plastics or painted surfaces. |
|
|
|
|
| |
General Chemical strippable coating
is also used to protect heavy
traffic areas and sensitive surfaces
against staining and abrasion during
construction, storage and transport.
Simply roll on and peel off on
completion. The tough film is
weather-resistant, UV and solvent
resistant. |
|
|
|
|
| |
 |
Strippable coatings |
|
Temporary Protective Peelable
Coating and Maskant For
Protecting Parts During
Shipping, Storage And In Transit |
|
Water Based: For Shipping,
Storage and transit , Strippable
excellent water and corrosion
resistant water based Peelable
coating to protect parts from
rust and damage . Low viscosity
for air assisted spray and
brushable. sed for protecting
Nascent Ferrous and Aluminum
Metals from Rust and oxidation
Color:
clear
Application: AA
Substrates: M; TS; G
Multi Metals |
|
Water Based: Same as
MetalpROTECT_5000 with white
pigments for added UV protection
outdoor from sun. For Shipping,
Storage and transit , Strippable
excellent water and acid
resistant solvent based Peelable
coating to protect parts from
rust and damage . Low viscosity
for air assisted spray and
brushable. Used for protecting
Nascent Ferrous and Aluminum
Metals from Rust and
oxidation
Color: White
Application: AA
Substrates: M; TS; G |
|
Water Based Invisible Bra For
Bumpers, Lenses, Lamps and
skirts of transportation vehicle
temporary protection against
stone chips, bug damage,
abrasion and weathering while
allowing a vehicle's color
brilliance to show through and
its design intent to be
maintained.
Color: Clear
Application: AA; BR; R
Substrates: A; G; M; TS;
P; W
|
|
|
|
|
|
|
|
|
| |
 |
Customer Comments:
We have a client
that needs to have the blade
protected. They simply want to
dip the blade. Would any product
be able to dipped into our
coating and have a successful
covering instead of brushing and
painting it on?
MetalProtect
5000 is a water based peelable
coating that cures upon water
evaporation to a clear hard
film. This coating has anti
corrosive additives to protect
metals from corrosion. Just dip
the blades and let the coating
dry. If too thick than reduction
with water would be necessary
2. A unique
request, however I would like to
see if we can solve the problems
a. They currently use a wax type
coating to cover the blades. To
be in line with the new consumer
act they need the blade covered
thick, more than ordinary paint
microns, almost like a lump of
peelable coating, and they would
like to try and do this with a
peelable coating.
It only needs to survive the
retail store and the transport
there. In essence they would
like a really think application
of peelable coating on the edge
of the blade.
MetalProtect
5000, as is, would be the proper
coating for this application.
Just dip the blade and let the
coating dry. The uncured coating
is white and the cured coating
is clear. MetalProtect is a
water based peelable coating
formulated for rust inhibition
of metals. Since presently they
use wax, than MetalProtect 5000
would be a much easier and
better approach to metal
protection and much easier
removal at destination point. No
wax, no mess. Just peel. |
|
|
| |
 |
Application: |
|
|
| |
|
|
|
|
|
| |
Standard air assisted, or airless
spray equipment, Brush or Roller
(Use lambs wool roller). |
|
|
|
|
| |
Using standard good atomizing spray
equipment (eg. DeVilbiss MBC gun, FF
nozzle and No 765 air cap) with
pressure feed, a 100 micron (0.004")
film can be applied to a vertical
surface in one coat. Atomization
pressure of 5ATM (75lbs/sq in) and
sufficient pot pressure (0.3 ATM -
5lbs/sq in) to obtain proper fluid
delivery is recommended. Airless
spray can also be used such as Graco
No 205-904 with a 163-168 insert and
a 28:1 ratio pump. Use water only
for cleaning spray equipment. Drying
can be accelerated by circulation of
warm air or infra red lamps. |
|
|
|
|
| |
 |
Special Instructions: |
|
|
|
|
|
| |
When spraying over freshly lacquered
or re-enameled surfaces, allow 24
for lacquer to dry and allow full
enamel cure before applying peelable
coatings. Be sure to apply full film
thickness of 100 microns (0.004").
On equipment to be stored for many
months exposed to rain, sun and
snow, it is recommended that a 200
micron (0.008") film of Strippable
coating be applied in two coats,
drying one hour between coats. This
is a water based compound and should
be protected from freezing.
Recommended storage temperature is
10oC-32oC. |
|
|
|
|
| |
Try to avoid 'feather edges' or
areas where it is applied thinly. In
order to achieve a defined edge it
may help to apply masking tape,
roller up to and over the tape and
remove tape while Our Peelable
coatings Peelable coating is still
wet. |
|
|
|
|
| |
 |
Repair: |
|
|
| |
If the Our Peelable coating film
rips or tears, the flap may be
lifted and resealed by applying a
fresh wet coat to the underside and
resealing. Alternatively, cut away
flap and re-apply fresh coating, it
will bond to itself.
|
|
|
|
|
| |
 |
External Weather Resistance: |
|
|
| |
Long-term exposure to sunlight will
cause premature deterioration and
brittleness of the film. Exposure to
water after the film is dried will
soften the film but it will recover
once it dries. Avoid traffic over
the wet or while the film is wet. If
components are to be stored
externally for several weeks we
recommend the application of acrylic
topcoat which will protect for 12
months and more.
|
|
|
|
|
| |
 |
Drying Time: |
|
|
| |
It is critical that Our Peelable
coating film is allowed to cure dry.
Drying time will vary according to
humidity, temperature and weather
condition. The evaporation of water
will be speeded by air movement and
warmth supplied by natural and
mechanical means. |
|
|
|
|
| |
 |
Adhesion: |
|
|
| |
Our Peelable coatings is a temporary
protective Peelable coating and
adhesion is low.
|
|
|
|
|
| |
 |
Process: |
|
|
| |
Our Peelable coatings once
completely dry are resistant to
water and solvent and acts as a mask
against sprayed emulsion paints,
lacquers, oil or grease and water.
|
|
|
|
|
| |
 |
Removal: |
|
|
| |
The dry Our Peelable coatings
strippable coating film can be
easily removed either by hand
stripping or other means. Our
Peelable coatings are thermoplastic.
Do not try to remove in freezing
conditions. Our Peelable coatings
becomes brittle in freezing
condition.
|
|
|
|
|
| |
 |
Clean Up: |
|
|
| |
Our Peelable coating is a
water-based product and you can
clean spray equipment and brushes
with water. Do this immediately
before peelalbe coating starts to
dry.
|
|
|
|
|
| |
 |
Coverage: |
|
|
| |
One liter will cover approximately 4
square meters at a dry film
thickness of 100 microns. You can
also use following chart to
calculate in mil thickness and
gallon coverage.
|
|
|
|
|
| |
Approximate Square Feet Coverage Per
Gallon of General Chemical's
Peelable coatings:
|
|
|
|
|
| |
Water Based coating's Wet films
to Apply In Mils |
4.5 |
6 |
9 |
11 |
13 |
14 |
16 |
18 |
21 |
| Square feet of
Coverage per Gallon |
401 |
267 |
194 |
155 |
129 |
111 |
97 |
86 |
75 |
| Dry Film Build
Required In Mils |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
| Solvent based
coating's wet films to apply
|
6.6 |
10 |
13 |
|
|
|
|
|
|
| Square feet of
Coverage/Gallon |
250 |
160 |
50 |
|
|
|
|
|
|
|
|
|
|
|
| |
General Chemical has a complete line
of Peelable Masks to meet your
challenging requirement. If we do
not have something to meet your
specific requirement, than we will
develop it by working with you to
meet that need for strippable
coating. |
|
|
|
|
|
|
|
|
Top Temporary Protective
Peelable Coating and Maskant For
Protecting Parts During Shipping,
Storage And In Transit |
|
